Heybridge vs Preservation Bay

Side-by-side tap water quality comparison

Heybridge, TAS

Quality Score

Supplied by TasWater

Preservation Bay, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Heybridge scores 9.7/10 and Preservation Bay scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Heybridge, TAS
Preservation Bay, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Heybridge Preservation Bay Unit ADWG Guideline
Alkalinity 15.791667 Measured 26.428571 Measured mg/L No limit
Aluminium 0.0275 Good 0.0325 Good mg/L < 0.2
Ammonia 0.002913 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 7.9 Measured 19.25 Measured mg/L No limit
Chloride 13.875 Good 11 Good mg/L < 250
Chromium 0.001063 Measured 0.001 Measured mg/L No limit
Colour 2.222222 Good 2.083333 Good Pt-Co < 15
Conductivity 113.333333 Measured 172.142857 Measured uS/cm No limit
Copper 0.002312 Good 0.001875 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.906667 Good 0.85 Good mg/L < 1.5
Free Chlorine 0.753844 Good 1.168438 Good mg/L < 5
Hardness 29.875 Good 57.416667 Good mg/L < 200
Iron 0.014375 Good 0.0125 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 2.575 Measured 2.15 Measured mg/L No limit
Manganese 0.00325 Good 0.001625 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.52 Good 0.1855 Good mg/L < 50
Nitrite 0.002217 Measured 0.002 Measured mg/L No limit
pH 7.634779 Normal 7.246875 Normal pH units 6.5 – 8.5
Sodium 7.15 Good 5.075 Good mg/L < 180
Sulfate 10.304348 Good 30.928571 Good mg/L < 500
Temperature 14.830782 Measured 14.54375 Measured degrees C No limit
Total Chlorine 0.87 Good 1.361429 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 71.041667 Good 91.916667 Good mg/L < 600
Trihalomethanes 0.0345 Good 0.027 Good mg/L < 0.25
Turbidity 0.333316 Good 0.412125 Good NTU < 5
Zinc 0.003063 Measured 0.004 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.