Kellevie vs Triabunna
Side-by-side tap water quality comparison
Which suburb has better water?
Kellevie has better water quality with a score of 9.8/10 compared to Triabunna's 9.0/10. Kellevie has softer water (45.857143 vs 73.8 mg/L).
Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.
Visual comparison
Key metrics comparison
Full water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Kellevie | Triabunna | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 22.214286 Measured | 39.5 Measured | mg/L | No limit |
| Aluminium | 0.033333 Good | 0.011667 Good | mg/L | < 0.2 |
| Ammonia | 0.002 Measured | 0.002214 Measured | mg/L | No limit |
| Antimony | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Arsenic | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Cadmium | 0.0002 Measured | 0.0002 Measured | mg/L | No limit |
| Calcium | 15.75 Measured | 16.285714 Measured | mg/L | No limit |
| Chloride | 10 Good | 80.5 Good | mg/L | < 250 |
| Chromium | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Colour | 2 Good | 2.142857 Good | Pt-Co | < 15 |
| Conductivity | 125 Measured | 422.142857 Measured | uS/cm | No limit |
| Copper | 0.001083 Good | 0.004167 Good | mg/L | < 2 |
| Cyanide | 0.005 Measured | 0.005 Measured | mg/L | No limit |
| E. coli | 0 Compliant | 0 Compliant | MPN/100ml | < 0 |
| Fluoride | — | 0.863333 Good | mg/L | < 1.5 |
| Free Chlorine | 0.495192 Good | 0.864063 Good | mg/L | < 5 |
| Hardness | 45.857143 Good | 73.8 Good | mg/L | < 200 |
| Iron | 0.01 Good | 0.010833 Good | mg/L | < 0.3 |
| Lead | 0.001 Good | 0.001 Good | mg/L | < 0.01 |
| Magnesium | 1.775 Measured | 9.042857 Measured | mg/L | No limit |
| Manganese | 0.001 Good | 0.009083 Good | mg/L | < 0.1 |
| Mercury | 0.0001 Measured | 0.0001 Measured | mg/L | No limit |
| Nickel | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Nitrate | 0.046214 Good | 0.030071 Good | mg/L | < 50 |
| Nitrite | 0.002 Measured | 0.002 Measured | mg/L | No limit |
| pH | 7.559231 Normal | 7.31875 Normal | pH units | 6.5 – 8.5 |
| Sodium | 5.15 Good | 42.857143 Good | mg/L | < 180 |
| Sulfate | 25.714286 Good | 48.428571 Good | mg/L | < 500 |
| Temperature | 13.251282 Measured | 15.097917 Measured | degrees C | No limit |
| Total Chlorine | 0.6625 Good | 0.734167 Good | mg/L | < 5 |
| Total Coliforms | 0 Compliant | 2.912903 Detected | MPN/100ml | < 0 |
| Total Dissolved Solids | 82.714286 Good | 250 Good | mg/L | < 600 |
| Trihalomethanes | 0.030333 Good | 0.069 Good | mg/L | < 0.25 |
| Turbidity | 0.224103 Good | 0.321042 Good | NTU | < 5 |
| Zinc | 0.001417 Measured | 0.005083 Measured | mg/L | No limit |
Explore further
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.