Liffey vs Longford

Side-by-side tap water quality comparison

Liffey, TAS

Quality Score

Supplied by TasWater

Longford, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Liffey scores 9.7/10 and Longford scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Liffey, TAS
Longford, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Liffey Longford Unit ADWG Guideline
Alkalinity 12.111111 Measured 29.166667 Measured mg/L No limit
Aluminium 0.031667 Good 0.040833 Good mg/L < 0.2
Ammonia 0.002 Measured 0.003556 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 7.5 Measured 12.3 Measured mg/L No limit
Chloride 8.625 Good 37 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.111111 Good 2.555556 Good Pt-Co < 15
Conductivity 91.333333 Measured 211.833333 Measured uS/cm No limit
Copper 0.001667 Good 0.003083 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.956667 Good 0.81 Good mg/L < 1.5
Free Chlorine 0.889293 Good 0.797453 Good mg/L < 5
Hardness 25.416667 Good 44.555556 Good mg/L < 200
Iron 0.011667 Good 0.010833 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 1.733333 Measured 5 Measured mg/L No limit
Manganese 0.002167 Good 0.00725 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.076167 Good 0.161353 Good mg/L < 50
Nitrite 0.002 Measured 0.002444 Measured mg/L No limit
pH 7.225152 Normal 7.359091 Normal pH units 6.5 – 8.5
Sodium 3.3755 Good 23.143143 Good mg/L < 180
Sulfate 13.277778 Good 26.888889 Good mg/L < 500
Temperature 14.438384 Measured 14.624242 Measured degrees C No limit
Total Chlorine 1.067778 Good 0.982381 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 59.111111 Good 121.777778 Good mg/L < 600
Trihalomethanes 0.028667 Good 0.035167 Good mg/L < 0.25
Turbidity 0.319091 Good 0.274727 Good NTU < 5
Zinc 0.002 Measured 0.006667 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.