Queenstown vs Strahan

Side-by-side tap water quality comparison

Queenstown, TAS

Quality Score

Supplied by TasWater

Strahan, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Queenstown scores 9.6/10 and Strahan scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Queenstown, TAS
Strahan, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Queenstown Strahan Unit ADWG Guideline
Alkalinity 29.5 Measured 34.714286 Measured mg/L No limit
Aluminium 0.02125 Good 0.033333 Good mg/L < 0.2
Ammonia 0.0025 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 0.85 Measured 1.783333 Measured mg/L No limit
Chloride 17.25 Good 28.833333 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.083333 Good 2.214286 Good Pt-Co < 15
Conductivity 187.5 Measured 321.428571 Measured uS/cm No limit
Copper 0.0085 Good 0.006917 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.933333 Good 0.863333 Good mg/L < 1.5
Free Chlorine 0.660242 Good 0.606559 Good mg/L < 5
Hardness 5.666667 Good 12.857143 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.875 Measured 2.066667 Measured mg/L No limit
Manganese 0.005 Good 0.004417 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001333 Measured mg/L No limit
Nitrate 0.003833 Good 0.029429 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.332097 Normal 7.284839 Normal pH units 6.5 – 8.5
Sodium 34.5 Good 55.5 Good mg/L < 180
Sulfate 30.25 Good 71.642857 Good mg/L < 500
Temperature 13.042742 Measured 12.605376 Measured degrees C No limit
Total Chlorine 0.774167 Good 0.7775 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 109 Good 189.285714 Good mg/L < 600
Trihalomethanes 0.13225 Good 0.056833 Good mg/L < 0.25
Turbidity 0.360968 Good 0.257957 Good NTU < 5
Zinc 0.01125 Measured 0.012417 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.