Romsey vs Yulara

Name: Water Quality Comparison: Romsey vs Yulara
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Romsey, VIC

9.7

Quality Score

Supplied by Greater Western Water

Yulara, NT

9.6

Quality Score

Supplied by Power and Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Romsey scores 9.7/10 and Yulara scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Yulara is 1 mg/L — above the taste threshold. That pool smell in every glass is real.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Romsey, VIC

Yulara, NT

Key metrics comparison

Hardness (mg/L)

Romsey

52 Higher

Yulara

5 Lower

pH Level

Romsey

7.5 Normal

Yulara

7 Normal

Fluoride (mg/L)

Romsey

0.06 Lower

Yulara

0.1 Higher

Chlorine (mg/L)

Romsey

0.32 Lower

Yulara

1 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Romsey	Yulara	Unit	ADWG Guideline
Alkalinity	37 Measured	73 Measured	mg/L CaCO3	No limit
Aluminium	0.01 Good	0.02 Good	mg/L	< 0.2
Calcium	—	0.00025 Measured	mg/L	No limit
Chloride	—	29 Good	mg/L	< 250
Colour	3 Good	2 Good	HU	< 15
Conductivity	—	7.5 Measured	µS/cm	No limit
Copper	—	0.1 Good	mg/L	< 2
E. coli	0 Compliant	—	MPN/100mL	< 0
Electrical Conductivity	257 Measured	—		No limit
Fluoride	0.06 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	0.32 Good	0.8 Good	mg/L	< 5
Hardness	52 Good	5 Good	mg/L CaCO3	< 200
Iron	0.01 Good	0.01 Good	mg/L	< 0.3
Magnesium	—	12 Measured	mg/L	No limit
Manganese	0.003 Good	0.005 Good	mg/L	< 0.1
Nitrate	0.11 Good	—	mg/L	< 50
pH	7.5 Normal	7 Normal	pH units	6.5 – 8.5
Sodium	24.3 Good	—	mg/L	< 180
Sulfate	—	0.003 Good	mg/L	< 500
Total Chlorine	1 Good	1 Good	mg/L	< 5
Total Dissolved Solids	—	85.1 Good	mg/L	< 600
Trihalomethanes	0.039 Good	—	mg/L	< 0.25
Turbidity	0.1 Good	0.96 Good	NTU	< 5
Zinc	—	0.00071 Measured	mg/L	No limit

Explore further

Romsey

Yulara

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Greater Western Water and Power and Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.