St Helens vs St Marys

Side-by-side tap water quality comparison

St Helens, TAS

Quality Score

Supplied by TasWater

St Marys, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! St Helens scores 9.6/10 and St Marys scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
St Helens, TAS
St Marys, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter St Helens St Marys Unit ADWG Guideline
Alkalinity 26.666667 Measured 146.666667 Measured mg/L No limit
Aluminium 0.0275 Good 0.01 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 3.325 Measured 55.5 Measured mg/L No limit
Chloride 18.25 Good 33 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.166667 Good 2.166667 Good Pt-Co < 15
Conductivity 180 Measured 411.666667 Measured uS/cm No limit
Copper 0.001875 Good 0.0115 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.86 Good 0.943333 Good mg/L < 1.5
Free Chlorine 1.132424 Good 0.792576 Good mg/L < 5
Hardness 13.5 Good 153.333333 Good mg/L < 200
Iron 0.01125 Good 0.0275 Good mg/L < 0.3
Lead 0.001125 Good 0.001 Good mg/L < 0.01
Magnesium 1.45 Measured 4.95 Measured mg/L No limit
Manganese 0.002625 Good 0.00325 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.239167 Good 0.007333 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.262424 Normal 7.10697 Normal pH units 6.5 – 8.5
Sodium 29.5 Good 17 Good mg/L < 180
Sulfate 29.916667 Good 14.333333 Good mg/L < 500
Temperature 14.536364 Measured 13.442424 Measured degrees C No limit
Total Chlorine 1.234286 Good 1 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 111.25 Good 231.666667 Good mg/L < 600
Trihalomethanes 0.03025 Good 0.0115 Good mg/L < 0.25
Turbidity 0.333636 Good 0.57303 Good NTU < 5
Zinc 0.002 Measured 0.0045 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.