Stuart vs Ti Tree

Name: Water Quality Comparison: Stuart vs Ti Tree
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Stuart, NT

9.5

Quality Score

Supplied by Power and Water Corporation

Ti Tree, NT

9.4

Quality Score

Supplied by Power and Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Stuart scores 9.5/10 and Ti Tree scores 9.4/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Ti Tree's tap water is 'very hard' at 228 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Stuart, NT

Ti Tree, NT

Key metrics comparison

Hardness (mg/L)

Stuart

217 Lower

Ti Tree

228 Higher

pH Level

Stuart

7.8 Normal

Ti Tree

8 Normal

Fluoride (mg/L)

Stuart

0.61 Lower

Ti Tree

0.95 Higher

Chlorine (mg/L)

Stuart

1 Same

Ti Tree

1 Same

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Stuart	Ti Tree	Unit	ADWG Guideline
Alkalinity	240 Measured	240 Measured	mg/L CaCO3	No limit
Aluminium	0.02 Good	0.02 Good	mg/L	< 0.2
Calcium	0.0013 Measured	0.00025 Measured	mg/L	No limit
Chloride	71 Good	68 Good	mg/L	< 250
Colour	2 Good	2 Good	HU	< 15
Conductivity	8.1 Measured	8.1 Measured	µS/cm	No limit
Copper	0.1 Good	0.01 Good	mg/L	< 2
Fluoride	0.61 Good	0.95 Good	mg/L	< 1.5
Free Chlorine	0.9 Good	0.9 Good	mg/L	< 5
Hardness	217 Exceeds	228 Exceeds	mg/L CaCO3	< 200
Iron	0.02 Good	0.01 Good	mg/L	< 0.3
Magnesium	18 Measured	88 Measured	mg/L	No limit
Manganese	0.007 Good	0.005 Good	mg/L	< 0.1
pH	7.8 Normal	8 Normal	pH units	6.5 – 8.5
Sulfate	0.004 Good	0.003 Good	mg/L	< 500
Total Chlorine	1 Good	1 Good	mg/L	< 5
Total Dissolved Solids	71.8 Good	75.8 Good	mg/L	< 600
Turbidity	0.85 Good	1.4 Good	NTU	< 5
Zinc	0.023 Measured	0.002 Measured	mg/L	No limit

Explore further

Stuart

Ti Tree

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Power and Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.