As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Ti Tree, NT

Postcode 0872 · Supplied by Power and Water Corporation via Ti Tree

Current data · 2024 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Ti Tree

Ti Tree is a suburb of 88 residents in Northern Territory (postcode 0872). The median age is 36. It falls within the Power and Water Corporation area. Neighbouring suburbs include Irlpme, Braitling, Stuart, Larapinta.

Most residents rent (42%), while 0% own their home with a mortgage, while 0% own outright. The median household income is $97,500 per year. The top countries of birth for residents are China (140%).

Tap water in Ti Tree is supplied by Power and Water Corporation. The suburb receives water via the Ti Tree supply zone.

Water quality summary

Based on 2024 water quality reports, Ti Tree achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 228 mg/L, classified as very hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 8, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.95 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 75.8 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 1.4 NTU, within the ADWG guideline of 5 NTU.

Compare with nearby suburbs: Irlpme , Braitling , Stuart

Suburb snapshot

Population

88

Median Age

36 years

Median Income

$1,875 /week

Recommended filters for Ti Tree

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Ti Tree's water

Ideal for Ti Tree — reduces hardness from 228 mg/L, removes chlorine taste and odour.

YARNA Capacitive Electronic Water Descaler Whole House System

YARNA

Capacitive Electronic Water Descaler (Whole House)

4 · 538 ratings on Amazon

Mid-range Matched to Ti Tree's water

Ideal for Ti Tree — helps reduce limescale buildup from hard water (228 mg/L) without removing hardness minerals.

Nakii Water Filter Pitcher

Nakii

Water Filter Pitcher (150 Gallons)

4.4 · 6,827 ratings on Amazon

Budget-friendly Matched to Ti Tree's water

Ideal for Ti Tree — removes chlorine taste and odour.

How Ti Tree compares

Compared to Northern Territory and national averages

Metric Ti Tree NT Avg National Avg
Hardness 228 mg/L 103.9 mg/L 85.3 mg/L
pH 8 7.3 7.8
Fluoride 0.95 mg/L 0.6 mg/L 0.7 mg/L
Chlorine 1 mg/L — —
Turbidity 1.4 NTU 1.2 NTU 0.4 NTU
TDS 75.8 mg/L 35.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Total Chlorine 1 mg/L < 5 Good
Copper 0.01 mg/L < 2 Good
Fluoride 0.95 mg/L < 1.5 Good
Aluminium 0.02 mg/L < 0.2 Good
Chloride 68 mg/L < 250 Good
Free Chlorine 0.9 mg/L < 5 Good
Colour 2 HU < 15 Good
Hardness 228 mg/L CaCO3 < 200 Exceeds
Iron 0.01 mg/L < 0.3 Good
Manganese 0.005 mg/L < 0.1 Good
pH 8 pH units 6.5 – 8.5 Normal
Sulfate 0.003 mg/L < 500 Good
Total Dissolved Solids 75.8 mg/L < 600 Good
Turbidity 1.4 NTU < 5 Good
Zinc 0.002 mg/L No limit Measured
Alkalinity 240 mg/L CaCO3 No limit Measured
Calcium 0.00025 mg/L No limit Measured
Conductivity 8.1 µS/cm No limit Measured
Magnesium 88 mg/L No limit Measured

Safety assessment

Of 19 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: Hardness at 228 mg/L CaCO3.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Very hard (228 mg/L)

Water Hardness

Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.

Normal Range

pH Level

pH of 8 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.95 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Ti Tree measures 1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Descale Appliances Regularly

With very hard water at 228 mg/L, descale your kettle, showerhead, and hot water system every few months using white vinegar to maintain efficiency.

Fluoride in Your Water

Fluoride measures 0.95 mg/L in Ti Tree. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Sediment Filtration

Turbidity is 1.4 NTU in Ti Tree. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.

Get water quality alerts

We'll email you when Ti Tree's water data is updated.

Frequently asked questions

Is tap water safe to drink in Ti Tree?
Yes, tap water in Ti Tree is generally safe to drink. It scores 9.4 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Power and Water Corporation. Of 19 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: Hardness at 228 mg/L CaCO3.
How hard is the water in Ti Tree?
Water hardness in Ti Tree is 228 mg/L, classified as very hard. Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.
What water utility supplies Ti Tree?
Ti Tree is supplied by Power and Water Corporation.
Does Ti Tree water have fluoride?
Yes, water in Ti Tree is fluoridated, with a fluoride level of 0.95 mg/L. This is within the recommended range for dental health.
What is the water quality score for Ti Tree?
Ti Tree has a WaterScore of 9.4 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Ti Tree?
The population of Ti Tree, NT is 88 according to the 2021 Australian Census. The median age of residents is 36 years.

Water utility

Supply Zone
Ti Tree
Data Source
Power and Water Corporation — 2017 Power and Water Corporation Drinking Water Quality Report, Drinking Water Quality Report 2019 WEB, 2024 Power and Water Drinking Water Quality Report

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.4 and 10.0

Utility reports average the grid — not your home

Ti Tree's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Darwin and the NT

In-depth articles on the water supply that serves Ti Tree

Cite this page

Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.

WaterScore. (2026). Tap water quality in Ti Tree, NT [Data set]. Compiled from Power and Water Corporation data (2024 report). https://waterscore.com.au/water-quality/ti-tree-nt/

Add Ti Tree, NT water data to your website

For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.

Explore more

Related pages for Ti Tree, NT

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Power and Water Corporation (2024 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Very hard · 228 mg/L — scale damage

iSpring · ★ 4.6 on Amazon

Stop the scale →