Ti Tree vs White Gums

Name: Water Quality Comparison: Ti Tree vs White Gums
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Ti Tree, NT

9.4

Quality Score

Supplied by Power and Water Corporation

White Gums, NT

9.5

Quality Score

Supplied by Power and Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Ti Tree scores 9.4/10 and White Gums scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Ti Tree's tap water is 'very hard' at 228 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Ti Tree, NT

White Gums, NT

Key metrics comparison

Hardness (mg/L)

Ti Tree

228 Higher

White Gums

217 Lower

pH Level

Ti Tree

8 Normal

White Gums

7.8 Normal

Fluoride (mg/L)

Ti Tree

0.95 Higher

White Gums

0.61 Lower

Chlorine (mg/L)

Ti Tree

1 Same

White Gums

1 Same

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Ti Tree	White Gums	Unit	ADWG Guideline
Alkalinity	240 Measured	240 Measured	mg/L CaCO3	No limit
Aluminium	0.02 Good	0.02 Good	mg/L	< 0.2
Calcium	0.00025 Measured	0.0013 Measured	mg/L	No limit
Chloride	68 Good	71 Good	mg/L	< 250
Colour	2 Good	2 Good	HU	< 15
Conductivity	8.1 Measured	8.1 Measured	µS/cm	No limit
Copper	0.01 Good	0.1 Good	mg/L	< 2
Fluoride	0.95 Good	0.61 Good	mg/L	< 1.5
Free Chlorine	0.9 Good	0.9 Good	mg/L	< 5
Hardness	228 Exceeds	217 Exceeds	mg/L CaCO3	< 200
Iron	0.01 Good	0.02 Good	mg/L	< 0.3
Magnesium	88 Measured	18 Measured	mg/L	No limit
Manganese	0.005 Good	0.007 Good	mg/L	< 0.1
pH	8 Normal	7.8 Normal	pH units	6.5 – 8.5
Sulfate	0.003 Good	0.004 Good	mg/L	< 500
Total Chlorine	1 Good	1 Good	mg/L	< 5
Total Dissolved Solids	75.8 Good	71.8 Good	mg/L	< 600
Turbidity	1.4 Good	0.85 Good	NTU	< 5
Zinc	0.002 Measured	0.023 Measured	mg/L	No limit

Explore further

Ti Tree

White Gums

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Power and Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.