As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Belconnen Dc, ACT

Postcode 2617 · Supplied by Icon Water via Belconnen

Current data · 2024-25 annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Belconnen Dc

Belconnen Dc is a suburb of 8,502 residents in Australian Capital Territory (postcode 2617). The median age is 30. It falls within the Icon Water area. Neighbouring suburbs include University Of Canberra, Lawson, Bruce, Mckellar.

Most residents rent (64%), while 21% own their home with a mortgage, while 11% own outright. The median household income is $92,352 per year. The top countries of birth for residents are China (22%), India (12%), and Nepal (11%).

Tap water in Belconnen Dc is supplied by Icon Water. The suburb receives water via the Belconnen supply zone.

Water quality summary

Based on 2024-25 water quality reports, Belconnen Dc achieves a WaterScore of 8.3 out of 10, rated excellent overall. Water hardness measures 37.9 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.86, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.8 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.62 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 72 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.4 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: University Of Canberra , Lawson , Bruce

Suburb snapshot

Population

8,502

Median Age

30 years

Median Income

$1,776 /week

Owner-occupied

33%

Recommended filters for Belconnen Dc

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Belconnen Dc's water

Ideal for Belconnen Dc — removes chlorine taste and odour.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Belconnen Dc's water

A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Belconnen Dc's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Belconnen Dc's water

Ideal for Belconnen Dc — removes chlorine taste and odour.

How Belconnen Dc compares

Compared to Australian Capital Territory and national averages

Metric Belconnen Dc ACT Avg National Avg
Hardness 37.9 mg/L 37.9 mg/L 85.1 mg/L
pH 7.86 7.8 8.4
Fluoride 0.8 mg/L 0.8 mg/L 0.7 mg/L
Chlorine 0.62 mg/L
Turbidity 0.4 NTU 0.4 NTU 0.4 NTU
TDS 72 mg/L 72.6 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
E. coli 0 MPN/100mL < 0 Compliant
Total Coliforms 0 MPN/100mL < 0 Compliant
Conductivity 101 µS/cm No limit Measured
pH 7.86 pH units 6.5 – 8.5 Normal
Temperature 16.7 °C No limit Measured
Total Dissolved Solids 72 mg/L < 600 Good
Colour 1 HU < 15 Good
Turbidity 0.4 NTU < 5 Good
Alkalinity 37 mg/L CaCO3 No limit Measured
Aluminium 29 mg/L < 0.2 Exceeds
Calcium 13.01 mg/L No limit Measured
Chloride 4.2 mg/L < 250 Good
Monochloramine 0.1 mg/L < 3 Good
Free Chlorine 0.62 mg/L < 5 Good
Total Chlorine 0.72 mg/L < 5 Good
Cyanide 0.004 mg/L No limit Measured
Fluoride 0.8 mg/L < 1.5 Good
Hardness 37.9 mg/L CaCO3 < 200 Good
Magnesium 1.31 mg/L No limit Measured
Nitrate 0.1 mg/L < 50 Good
Sodium 3.7 mg/L < 180 Good
Sulfate 4.9 mg/L < 500 Good
Antimony 3 mg/L No limit Measured
Cadmium 0.05 mg/L No limit Measured
Chromium 2 mg/L No limit Measured
Copper 13 mg/L < 2 Exceeds
Iron 0.01 mg/L < 0.3 Good
Lead 0.2 mg/L < 0.01 Exceeds
Manganese 0.006 mg/L < 0.1 Good
Nickel 1 mg/L No limit Measured
Zinc 5 mg/L No limit Measured
Trihalomethanes 0.038 mg/L < 0.25 Good

Safety assessment

Of 32 parameters tested, several exceed Australian Drinking Water Guidelines: Aluminium (29 mg/L), Copper (13 mg/L), Lead (0.2 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (37.9 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.86 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.8 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.62 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Belconnen Dc measures 0.62 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Belconnen Dc's water is soft at 37.9 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.8 mg/L in Belconnen Dc. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Get water quality alerts

We'll email you when Belconnen Dc's water data is updated.

Frequently asked questions

Is tap water safe to drink in Belconnen Dc?
Yes, tap water in Belconnen Dc is generally safe to drink. It scores 8.3 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Icon Water. Of 32 parameters tested, several exceed Australian Drinking Water Guidelines: Aluminium (29 mg/L), Copper (13 mg/L), Lead (0.2 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Belconnen Dc?
Water hardness in Belconnen Dc is 37.9 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Belconnen Dc?
Belconnen Dc is supplied by Icon Water.
Does Belconnen Dc water have fluoride?
Yes, water in Belconnen Dc is fluoridated, with a fluoride level of 0.8 mg/L. This is within the recommended range for dental health.
What is the water quality score for Belconnen Dc?
Belconnen Dc has a WaterScore of 8.3 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Belconnen Dc?
The population of Belconnen Dc, ACT is 8,502 according to the 2021 Australian Census. The median age of residents is 30 years.

Water utility

Utility
Icon Water
Supply Zone
Belconnen
Data Source
Icon Water — Drinking Water Quality Report 2024 25, Icon Water Drinking Water Quality Report 2015 2016

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.3 and 9.3

Utility reports average the grid — not your home

Belconnen Dc's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Canberra

In-depth articles on the water supply that serves Belconnen Dc

Explore more

Related pages for Belconnen Dc, ACT

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Icon Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 0.62 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →