As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Gumdale, QLD

Postcode 4154 · Supplied by Urban Utilities via Redland

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Gumdale

Gumdale is a suburb of 2,298 residents in Queensland (postcode 4154). The median age is 38. It falls within the Urban Utilities area. Neighbouring suburbs include Ransome, Wakerley, Chandler, Belmont.

Most residents own their home with a mortgage (56%), while 36% own outright, while 8% rent. The median household income is $177,060 per year. The top countries of birth for residents are United Kingdom (17%), New Zealand (13%), and South Africa (13%).

Tap water in Gumdale is supplied by Urban Utilities. The suburb receives water via the Redland, Urban Utilities System supply zones.

Water quality summary

Based on recent water quality reports, Gumdale achieves a WaterScore of 8.3 out of 10, rated excellent overall. Water hardness measures 85.2 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 27.9, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.83 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.4 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Ransome , Wakerley , Chandler

Suburb snapshot

Population

2,298

Median Age

38 years

Median Income

$3,405 /week

Owner-occupied

92%

Recommended filters for Gumdale

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Gumdale's water

Ideal for Gumdale — removes chlorine taste and odour.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Gumdale's water

A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for Gumdale's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Gumdale's water

Ideal for Gumdale — removes chlorine taste and odour.

How Gumdale compares

Compared to Queensland and national averages

Metric Gumdale QLD Avg National Avg
Hardness 85.2 mg/L 74.8 mg/L 85.1 mg/L
pH 27.9 23.6 8.4
Fluoride 0.83 mg/L 0.8 mg/L 0.7 mg/L
Chlorine 1.1 mg/L — —
Turbidity 0.4 NTU 0.3 NTU 0.4 NTU
TDS — — 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Fluoride 0.83 mg/L < 1.5 Good
Free Chlorine 1.1 mg/L < 5 Good
Monochloramine 2.2 mg/L < 3 Good
Total Chlorine 2.2 mg/L < 5 Good
Chlorate 0.071 mg/L No limit Measured
Cadmium 0.0001 mg/L No limit Measured
Chromium 0.001 mg/L No limit Measured
Copper 0.001 mg/L < 2 Good
Lead 0.001 mg/L < 0.01 Good
Manganese 0.003 mg/L < 0.1 Good
Nickel 0.001 mg/L No limit Measured
E. coli 0 CFU/100mL < 0 Compliant
Nitrate 0.072 mg/L < 50 Good
Nitrite 0.031 mg/L No limit Measured
Trihalomethanes 90.9 µg/L < 0.25 Exceeds
Chloride 61.2 mg/L < 250 Good
Hardness 85.2 mg/L < 200 Good
Sodium 32 mg/L < 180 Good
pH 27.9 mg/L 6.5 – 8.5 Outside range
Aluminium 0.042 mg/L < 0.2 Good
Iron 0.01 mg/L < 0.3 Good
Zinc 0.005 mg/L No limit Measured
Colour 1.2 HU < 15 Good
Turbidity 0.4 NTU < 5 Good
Calcium 19.8 mg/L No limit Measured
Magnesium 8.4 mg/L No limit Measured
Alkalinity 68.2 mg/L No limit Measured
Conductivity 421.1 µS/cm No limit Measured
Temperature 27.7 °C No limit Measured
Ndma 0.003 µg/L No limit Measured

Safety assessment

Of 30 parameters tested, most fall within Australian Drinking Water Guidelines with 2 exceptions: Trihalomethanes at 90.9 µg/L and pH at 27.9 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (85.2 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 27.9 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.83 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Gumdale's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Soft Water Advantage

Gumdale's water is moderately hard at 85.2 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.83 mg/L in Gumdale. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Alkaline Water

pH measures 27.9 in Gumdale, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.

Get water quality alerts

We'll email you when Gumdale's water data is updated.

Frequently asked questions

Is tap water safe to drink in Gumdale?
Yes, tap water in Gumdale is generally safe to drink. It scores 8.3 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Urban Utilities. Of 30 parameters tested, most fall within Australian Drinking Water Guidelines with 2 exceptions: Trihalomethanes at 90.9 µg/L and pH at 27.9 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Gumdale?
Water hardness in Gumdale is 85.2 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Gumdale?
Gumdale is supplied by Urban Utilities.
Does Gumdale water have fluoride?
Yes, water in Gumdale is fluoridated, with a fluoride level of 0.83 mg/L. This is within the recommended range for dental health.
What is the water quality score for Gumdale?
Gumdale has a WaterScore of 8.3 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Gumdale?
The population of Gumdale, QLD is 2,298 according to the 2021 Australian Census. The median age of residents is 38 years.

Water utility

Utility
Urban Utilities
Supply Zone
Redland
Data Source
Urban Utilities — Redland

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.3 and 9.3

Utility reports average the grid — not your home

Gumdale's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Brisbane and South East Queensland

In-depth articles on the water supply that serves Gumdale

Explore more

Related pages for Gumdale, QLD

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Urban Utilities (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 1.1 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →