As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Hamel, WA

Postcode 6215 · Supplied by Water Corporation via South West

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Hamel

Hamel is a suburb of 286 residents in Western Australia (postcode 6215). The median age is 42. It falls within the Water Corporation area. Neighbouring suburbs include Lake Clifton, Nanga Brook, Preston Beach, Wagerup.

Most residents own their home with a mortgage (48%), while 31% own outright, while 16% rent. The median household income is $96,772 per year. The top countries of birth for residents are United Kingdom (37%), Fiji (16%), and Philippines (12%).

Tap water in Hamel is supplied by Water Corporation. The suburb receives water via the South West supply zone.

Water quality summary

Based on recent water quality reports, Hamel achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 49 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 8.1, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.83 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Total dissolved solids (TDS) measure 143 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU.

Compare with nearby suburbs: Lake Clifton , Nanga Brook , Preston Beach

Suburb snapshot

Population

286

Median Age

42 years

Median Income

$1,861 /week

Owner-occupied

79%

Recommended filters for Hamel

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Hamel's water

A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Hamel's water profile.

Waterdrop TSA 8-Layer Under-Sink Water Filter System

Waterdrop

TSA Under-Sink Filter (Fluoride + PFAS)

4.4 · 2,237 ratings on Amazon

Mid-range Matched to Hamel's water

A reliable tsa under-sink filter (fluoride + pfas) suitable for Hamel's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Hamel's water

A reliable 8.5l stainless steel gravity system suitable for Hamel's water profile.

How Hamel compares

Compared to Western Australia and national averages

Metric Hamel WA Avg National Avg
Hardness 49 mg/L 122.1 mg/L 85.1 mg/L
pH 8.1 8 8.4
Fluoride 0.83 mg/L 0.8 mg/L 0.7 mg/L
Turbidity 0.1 NTU 0.2 NTU 0.4 NTU
TDS 143 mg/L 463.8 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 47 mg/L CaCO3 No limit Measured
Aluminium 0.023 mg/L < 0.2 Good
Chloride 40 mg/L < 250 Good
Hardness 49 mg/L CaCO3 < 200 Good
Iron 0.007 mg/L < 0.3 Good
Manganese 0.002 mg/L < 0.1 Good
pH 8.1 pH units 6.5 – 8.5 Normal
Sodium 23 mg/L < 180 Good
Sulfate 2 mg/L < 500 Good
Total Dissolved Solids 143 mg/L < 600 Good
Colour 1 HU < 15 Good
Turbidity 0.1 NTU < 5 Good
Fluoride 0.83 mg/L < 1.5 Good
Nitrate 0.2 mg/L < 50 Good
Trihalomethanes 0.016 mg/L < 0.25 Good

Safety assessment

Based on 15 parameters tested, all results fall within Australian Drinking Water Guidelines.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (49 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 8.1 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.83 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Data unavailable

Disinfection

Chlorine data is not currently available for Hamel.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Soft Water Advantage

Hamel's water is soft at 49 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.83 mg/L in Hamel. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Flush After Absence

If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.

Get water quality alerts

We'll email you when Hamel's water data is updated.

Frequently asked questions

Is tap water safe to drink in Hamel?
Yes, tap water in Hamel is generally safe to drink. It scores 9.5 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Water Corporation. Based on 15 parameters tested, all results fall within Australian Drinking Water Guidelines.
How hard is the water in Hamel?
Water hardness in Hamel is 49 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Hamel?
Hamel is supplied by Water Corporation.
Does Hamel water have fluoride?
Yes, water in Hamel is fluoridated, with a fluoride level of 0.83 mg/L. This is within the recommended range for dental health.
What is the water quality score for Hamel?
Hamel has a WaterScore of 9.5 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Hamel?
The population of Hamel, WA is 286 according to the 2021 Australian Census. The median age of residents is 42 years.

Water utility

Supply Zone
South West
Data Source
Water Corporation — WC South West Aesthetic Tables, WC South West Health Tables

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.5 and 10.0

Utility reports average the grid — not your home

Hamel's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Perth and WA

In-depth articles on the water supply that serves Hamel

Explore more

Related pages for Hamel, WA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Water Corporation (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap