Tap Water Quality in Phillip Dc, ACT
Postcode 2606 · Supplied by Icon Water via South Canberra, Woden and Weston
Quality Score
About Phillip Dc
Phillip Dc is a suburb of 5,197 residents in Australian Capital Territory (postcode 2606). The median age is 32. It falls within the Icon Water area. Neighbouring suburbs include Chifley, Swinger Hill, Woden, Phillip.
Most residents rent (49%), while 35% own their home with a mortgage, while 14% own outright. The median household income is $107,900 per year. The top countries of birth for residents are India (18%), Nepal (14%), and Philippines (12%).
Tap water in Phillip Dc is supplied by Icon Water. The suburb receives water via the South Canberra, Woden and Weston supply zone.
Water quality summary
Based on 2024-25 water quality reports, Phillip Dc achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 37 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.51, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.78 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.08 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 72 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Chifley , Swinger Hill , Woden
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
0.78/1.5 mg/L
3% below Australian Capital Territory avg
11% above national avg
Recommended filters for Phillip Dc
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra Pro)
4.8 · 125 ratings on Amazon
Ideal for Phillip Dc — removes chlorine taste and odour.
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for Phillip Dc's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Phillip Dc — removes chlorine taste and odour.
Comparison
How Phillip Dc compares
Compared to Australian Capital Territory and national averages
| Metric | Phillip Dc | ACT Avg | National Avg |
|---|---|---|---|
| Hardness | 37 mg/L | 36.8 mg/L | 80.3 mg/L |
| pH | 7.51 | 7.6 | 7.8 |
| Fluoride | 0.78 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 1.08 mg/L | — | — |
| Turbidity | 0.3 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 72 mg/L | 72.6 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| E. coli | 0 | MPN/100mL | < 0 | Compliant |
| Total Coliforms | 0 | MPN/100mL | < 0 | Compliant |
| Conductivity | 123 | µS/cm | No limit | Measured |
| pH | 7.51 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 17.3 | °C | No limit | Measured |
| Total Dissolved Solids | 72 | mg/L | < 600 | Good |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
| Alkalinity | 36 | mg/L CaCO3 | No limit | Measured |
| Aluminium | 0.03 | mg/L | < 0.2 | Good |
| Calcium | 12.12 | mg/L | No limit | Measured |
| Chloride | 4.1 | mg/L | < 250 | Good |
| Monochloramine | 0.06 | mg/L | < 3 | Good |
| Free Chlorine | 1.08 | mg/L | < 5 | Good |
| Total Chlorine | 1.14 | mg/L | < 5 | Good |
| Cyanide | 0.004 | mg/L | No limit | Measured |
| Fluoride | 0.78 | mg/L | < 1.5 | Good |
| Hardness | 37 | mg/L CaCO3 | < 200 | Good |
| Magnesium | 1.55 | mg/L | No limit | Measured |
| Nitrate | 0.1 | mg/L | < 50 | Good |
| Sodium | 3.8 | mg/L | < 180 | Good |
| Sulfate | 4.6 | mg/L | < 500 | Good |
| Antimony | 0.003 | mg/L | No limit | Measured |
| Cadmium | 0.00005 | mg/L | No limit | Measured |
| Chromium | 0.002 | mg/L | No limit | Measured |
| Copper | 0.014 | mg/L | < 2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Lead | 0.0004 | mg/L | < 0.01 | Good |
| Manganese | 0.004 | mg/L | < 0.1 | Good |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Trihalomethanes | 0.035 | mg/L | < 0.25 | Good |
Safety
Safety assessment
Based on 32 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (37 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.51 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.78 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.08 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Phillip Dc's chlorine level is 1.08 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Phillip Dc's water is soft at 37 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.78 mg/L in Phillip Dc. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Phillip Dc's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Phillip Dc?
How hard is the water in Phillip Dc?
What water utility supplies Phillip Dc?
Does Phillip Dc water have fluoride?
What is the water quality score for Phillip Dc?
What is the population of Phillip Dc?
Supplier
Water utility
- Utility
- Icon Water
- Supply Zone
- South Canberra, Woden and Weston
- Data Source
- Icon Water — Drinking Water Quality Report 2024 25
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.7 and 10.0
Utility reports average the grid — not your home
Phillip Dc's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Canberra
In-depth articles on the water supply that serves Phillip Dc
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Phillip Dc, ACT [Data set]. Compiled from Icon Water data (2024-25 annual report). https://waterscore.com.au/water-quality/phillip-dc-act/
Embed
Add Phillip Dc, ACT water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Phillip Dc, ACT
Is tap water safe?
Safety assessment
Water hardness
37 mg/L
Best water filter
Filter recommendations
Australian Capital Territory water quality
State coverage
Icon Water
Water utility
Compare with Kambah Village
Phillip Dc vs Kambah Village
Compare with Kambah
Phillip Dc vs Kambah
Compare with Wanniassa
Phillip Dc vs Wanniassa
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Icon Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.