Blackstone Heights vs Mowbray Heights
Side-by-side tap water quality comparison
Which suburb has better water?
It's very close! Blackstone Heights scores 9.6/10 and Mowbray Heights scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.
Visual comparison
Key metrics comparison
Hardness (mg/L)
Blackstone Heights
44.75 HigherMowbray Heights
26.24 LowerBlackstone Heights
7.176996 NormalMowbray Heights
7.284564 NormalFluoride (mg/L)
Blackstone Heights
0.966667 HigherMowbray Heights
0.943333 LowerChlorine (mg/L)
Blackstone Heights
0.769522 HigherMowbray Heights
0.768985 LowerFull water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Blackstone Heights | Mowbray Heights | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 16.15 Measured | 12.428571 Measured | mg/L | No limit |
| Aluminium | 0.025 Good | 0.018125 Good | mg/L | < 0.2 |
| Ammonia | 0.00205 Measured | 0.002071 Measured | mg/L | No limit |
| Antimony | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Arsenic | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Cadmium | 0.0002 Measured | 0.0002 Measured | mg/L | No limit |
| Calcium | 14.666667 Measured | 7.5375 Measured | mg/L | No limit |
| Chloride | 28.5 Good | 11.818182 Good | mg/L | < 250 |
| Chromium | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Colour | 2.25 Good | 2.142857 Good | Pt-Co | < 15 |
| Conductivity | 165.3 Measured | 97.37037 Measured | uS/cm | No limit |
| Copper | 0.006167 Good | 0.007375 Good | mg/L | < 2 |
| Cyanide | 0.005 Measured | 0.005 Measured | mg/L | No limit |
| E. coli | 0 Compliant | 0 Compliant | MPN/100ml | < 0 |
| Fluoride | 0.966667 Good | 0.943333 Good | mg/L | < 1.5 |
| Free Chlorine | 0.769522 Good | 0.768985 Good | mg/L | < 5 |
| Hardness | 44.75 Good | 26.24 Good | mg/L | < 200 |
| Iron | 0.016667 Good | 0.010625 Good | mg/L | < 0.3 |
| Lead | 0.001 Good | 0.001 Good | mg/L | < 0.01 |
| Magnesium | 4.05 Measured | 1.9375 Measured | mg/L | No limit |
| Manganese | 0.00275 Good | 0.001687 Good | mg/L | < 0.1 |
| Mercury | 0.0001 Measured | 0.0001 Measured | mg/L | No limit |
| Nickel | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Nitrate | 0.1697 Good | 0.160536 Good | mg/L | < 50 |
| Nitrite | 0.002 Measured | 0.002 Measured | mg/L | No limit |
| pH | 7.176996 Normal | 7.284564 Normal | pH units | 6.5 – 8.5 |
| Sodium | 9.857143 Good | 6.0625 Good | mg/L | < 180 |
| Sulfate | 20.85 Good | 12.392857 Good | mg/L | < 500 |
| Temperature | 14.946738 Measured | 14.575881 Measured | degrees C | No limit |
| Total Chlorine | 0.996842 Good | 0.904615 Good | mg/L | < 5 |
| Total Coliforms | 0 Compliant | 0 Compliant | MPN/100ml | < 0 |
| Total Dissolved Solids | 99.9 Good | 63.68 Good | mg/L | < 600 |
| Trihalomethanes | 0.042667 Good | 0.023778 Good | mg/L | < 0.25 |
| Turbidity | 0.38485 Good | 0.309666 Good | NTU | < 5 |
| Zinc | 0.0055 Measured | 0.003125 Measured | mg/L | No limit |
Explore further
Blackstone Heights
Mowbray Heights
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.