Tap Water Quality in Blackstone Heights, TAS
Postcode 7250 · Supplied by TasWater via South Esk Launceston
Quality Score
About Blackstone Heights
Blackstone Heights is a suburb of 1,245 residents in Tasmania (postcode 7250). The median age is 43. It falls within the TasWater area. Neighbouring suburbs include East Launceston, Elphin, Launceston, Newstead.
Most residents own their home with a mortgage (49%), while 42% own outright, while 7% rent. The median household income is $120,848 per year. The top countries of birth for residents are United Kingdom (38%), New Zealand (8%), and India (7%).
Tap water in Blackstone Heights is supplied by TasWater. The suburb receives water via the South Esk Launceston supply zone.
Water quality summary
Based on recent water quality reports, Blackstone Heights achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 44.75 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.176996, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.966667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.769522 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 99.9 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.38485 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: East Launceston , Elphin , Launceston
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Blackstone Heights
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Blackstone Heights — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Blackstone Heights's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Blackstone Heights — removes chlorine taste and odour.
Comparison
How Blackstone Heights compares
Compared to Tasmania and national averages
| Metric | Blackstone Heights | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 44.75 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.176996 | 7.4 | 8.4 |
| Fluoride | 0.966667 mg/L | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 0.769522 mg/L | — | — |
| Turbidity | 0.38485 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 99.9 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 16.15 | mg/L | No limit | Measured |
| Aluminium | 0.025 | mg/L | < 0.2 | Good |
| Ammonia | 0.00205 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 14.666667 | mg/L | No limit | Measured |
| Chloride | 28.5 | mg/L | < 250 | Good |
| Free Chlorine | 0.769522 | mg/L | < 5 | Good |
| Total Chlorine | 0.996842 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.25 | Pt-Co | < 15 | Good |
| Conductivity | 165.3 | uS/cm | No limit | Measured |
| Copper | 0.006167 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Fluoride | 0.966667 | mg/L | < 1.5 | Good |
| Hardness | 44.75 | mg/L | < 200 | Good |
| Iron | 0.016667 | mg/L | < 0.3 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Magnesium | 4.05 | mg/L | No limit | Measured |
| Manganese | 0.00275 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.1697 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.176996 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 9.857143 | mg/L | < 180 | Good |
| Sulfate | 20.85 | mg/L | < 500 | Good |
| Temperature | 14.946738 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 99.9 | mg/L | < 600 | Good |
| Trihalomethanes | 0.042667 | mg/L | < 0.25 | Good |
| Turbidity | 0.38485 | NTU | < 5 | Good |
| Zinc | 0.0055 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (44.75 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.176996 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.966667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.769522 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Blackstone Heights measures 0.769522 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Blackstone Heights's water is soft at 44.75 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.966667 mg/L in Blackstone Heights. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Blackstone Heights's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Blackstone Heights?
How hard is the water in Blackstone Heights?
What water utility supplies Blackstone Heights?
Does Blackstone Heights water have fluoride?
What is the water quality score for Blackstone Heights?
What is the population of Blackstone Heights?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- South Esk Launceston
- Data Source
- TasWater — South Esk Launceston
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
Blackstone Heights's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Launceston and northern Tasmania
In-depth articles on the water supply that serves Blackstone Heights
Related
Explore more
Related pages for Blackstone Heights, TAS
Is tap water safe?
Safety assessment
Water hardness
44.75 mg/L
Best water filter
Filter recommendations
Tasmania water quality
State coverage
TasWater
Water utility
Compare with East Launceston
Blackstone Heights vs East Launceston
Compare with Elphin
Blackstone Heights vs Elphin
Compare with Launceston
Blackstone Heights vs Launceston
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.