Blackstone Heights vs Newstead

Side-by-side tap water quality comparison

Blackstone Heights, TAS

Quality Score

Supplied by TasWater

Newstead, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Blackstone Heights scores 9.6/10 and Newstead scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Blackstone Heights, TAS
Newstead, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Blackstone Heights Newstead Unit ADWG Guideline
Alkalinity 16.15 Measured 11.2 Measured mg/L No limit
Aluminium 0.025 Good 0.025833 Good mg/L < 0.2
Ammonia 0.00205 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 14.666667 Measured 8 Measured mg/L No limit
Chloride 28.5 Good 15.25 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.25 Good 2.2 Good Pt-Co < 15
Conductivity 165.3 Measured 109.35 Measured uS/cm No limit
Copper 0.006167 Good 0.00575 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.966667 Good 0.896667 Good mg/L < 1.5
Free Chlorine 0.769522 Good 0.681936 Good mg/L < 5
Hardness 44.75 Good 29.166667 Good mg/L < 200
Iron 0.016667 Good 0.033333 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 4.05 Measured 2.666667 Measured mg/L No limit
Manganese 0.00275 Good 0.001667 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.1697 Good 0.171158 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.176996 Normal 7.28191 Normal pH units 6.5 – 8.5
Sodium 9.857143 Good 7.616667 Good mg/L < 180
Sulfate 20.85 Good 13.05 Good mg/L < 500
Temperature 14.946738 Measured 14.978515 Measured degrees C No limit
Total Chlorine 0.996842 Good 0.9945 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 99.9 Good 69.111111 Good mg/L < 600
Trihalomethanes 0.042667 Good 0.025 Good mg/L < 0.25
Turbidity 0.38485 Good 0.389549 Good NTU < 5
Zinc 0.0055 Measured 0.007083 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.