Bronte Park vs Flagstaff Gully

Side-by-side tap water quality comparison

Bronte Park, TAS

Quality Score

Supplied by TasWater

Flagstaff Gully, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bronte Park scores 9.8/10 and Flagstaff Gully scores 9.8/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Bronte Park, TAS
Flagstaff Gully, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bronte Park Flagstaff Gully Unit ADWG Guideline
Alkalinity 39.642857 Measured 19.727273 Measured mg/L No limit
Aluminium 0.019 Good 0.033333 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002182 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 12.25 Measured 16.666667 Measured mg/L No limit
Chloride 6.5 Good 10.111111 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.571429 Good 2.238095 Good Pt-Co < 15
Conductivity 104.214286 Measured 121.363636 Measured uS/cm No limit
Copper 0.0047 Good 0.007944 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Free Chlorine 0.837031 Good 0.829548 Good mg/L < 5
Hardness 37.083333 Good 46.285714 Good mg/L < 200
Iron 0.01 Good 0.012222 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.475 Measured 2.511111 Measured mg/L No limit
Manganese 0.0014 Good 0.001111 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.0045 Good 0.040409 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.576875 Normal 7.414137 Normal pH units 6.5 – 8.5
Sodium 3.85 Good 4.333333 Good mg/L < 180
Sulfate 1 Good 20 Good mg/L < 500
Temperature 11.018438 Measured 13.944521 Measured degrees C No limit
Total Chlorine 1.158333 Good 0.966842 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 63.9375 Good 75.285714 Good mg/L < 600
Trihalomethanes 0.0495 Good 0.027556 Good mg/L < 0.25
Turbidity 0.236563 Good 0.310575 Good NTU < 5
Zinc 0.0048 Measured 0.004056 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.