As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Bronte Park, TAS

Postcode 7140 · Supplied by TasWater via Bronte Park

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Bronte Park

Bronte Park is a suburb of 49 residents in Tasmania (postcode 7140). The median age is 59. It falls within the TasWater area. Neighbouring suburbs include Wayatinah, Walls Of Jerusalem, Black Hills, Boyer.

Most residents own outright (71%), while 29% own their home with a mortgage, while 0% rent. The median household income is $33,748 per year. The top countries of birth for residents are United Kingdom (80%).

Tap water in Bronte Park is supplied by TasWater. The suburb receives water via the Bronte Park supply zone.

Water quality summary

Based on recent water quality reports, Bronte Park achieves a WaterScore of 9.8 out of 10, rated excellent overall. Water hardness measures 37.083333 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.576875, which is within the ADWG guideline range of 6.5–8.5. Chlorine, used for disinfection, measures 0.837031 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 63.9375 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.236563 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Wayatinah , Walls Of Jerusalem , Black Hills

Suburb snapshot

Population

49

Median Age

59 years

Median Income

$649 /week

Owner-occupied

100%

Recommended filters for Bronte Park

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Bronte Park's water

Ideal for Bronte Park — removes chlorine taste and odour.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Bronte Park's water

A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Bronte Park's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Bronte Park's water

Ideal for Bronte Park — removes chlorine taste and odour.

How Bronte Park compares

Compared to Tasmania and national averages

Metric Bronte Park TAS Avg National Avg
Hardness 37.083333 mg/L 34.8 mg/L 85.1 mg/L
pH 7.576875 7.4 8.4
Fluoride 0.9 mg/L 0.7 mg/L
Chlorine 0.837031 mg/L
Turbidity 0.236563 NTU 0.3 NTU 0.4 NTU
TDS 63.9375 mg/L 93.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 39.642857 mg/L No limit Measured
Aluminium 0.019 mg/L < 0.2 Good
Ammonia 0.002 mg/L No limit Measured
Antimony 0.001 mg/L No limit Measured
Arsenic 0.001 mg/L No limit Measured
Cadmium 0.0002 mg/L No limit Measured
Calcium 12.25 mg/L No limit Measured
Chloride 6.5 mg/L < 250 Good
Free Chlorine 0.837031 mg/L < 5 Good
Total Chlorine 1.158333 mg/L < 5 Good
Chromium 0.001 mg/L No limit Measured
Colour 2.571429 Pt-Co < 15 Good
Conductivity 104.214286 uS/cm No limit Measured
Copper 0.0047 mg/L < 2 Good
Cyanide 0.005 mg/L No limit Measured
E. coli 0 MPN/100ml < 0 Compliant
Hardness 37.083333 mg/L < 200 Good
Iron 0.01 mg/L < 0.3 Good
Lead 0.001 mg/L < 0.01 Good
Magnesium 0.475 mg/L No limit Measured
Manganese 0.0014 mg/L < 0.1 Good
Mercury 0.0001 mg/L No limit Measured
Nickel 0.001 mg/L No limit Measured
Nitrate 0.0045 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
pH 7.576875 pH units 6.5 – 8.5 Normal
Sodium 3.85 mg/L < 180 Good
Sulfate 1 mg/L < 500 Good
Temperature 11.018438 degrees C No limit Measured
Total Coliforms 0 MPN/100ml < 0 Compliant
Total Dissolved Solids 63.9375 mg/L < 600 Good
Trihalomethanes 0.0495 mg/L < 0.25 Good
Turbidity 0.236563 NTU < 5 Good
Zinc 0.0048 mg/L No limit Measured

Safety assessment

Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (37.083333 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.576875 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Data unavailable

Fluoride

Fluoride data is not currently available for Bronte Park.

Chlorine

Disinfection

Chlorine measured at 0.837031 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Bronte Park measures 0.837031 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Bronte Park's water is soft at 37.083333 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Flush After Absence

If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.

Get water quality alerts

We'll email you when Bronte Park's water data is updated.

Frequently asked questions

Is tap water safe to drink in Bronte Park?
Yes, tap water in Bronte Park is generally safe to drink. It scores 9.8 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by TasWater. Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Bronte Park?
Water hardness in Bronte Park is 37.083333 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Bronte Park?
Bronte Park is supplied by TasWater.
Does Bronte Park water have fluoride?
Fluoride data is not currently available for Bronte Park, TAS.
What is the water quality score for Bronte Park?
Bronte Park has a WaterScore of 9.8 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Bronte Park?
The population of Bronte Park, TAS is 49 according to the 2021 Australian Census. The median age of residents is 59 years.

Water utility

Utility
TasWater
Supply Zone
Bronte Park
Data Source
TasWater — Bronte Park

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.8 and 10.0

Utility reports average the grid — not your home

Bronte Park's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Hobart and Tasmania

In-depth articles on the water supply that serves Bronte Park

Explore more

Related pages for Bronte Park, TAS

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 0.837031 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →