As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Dee, TAS

Postcode 7140 · Supplied by TasWater via Bothwell

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Dee

Dee is a suburb of 7 residents in Tasmania (postcode 7140). The median age is 74. It falls within the TasWater area. Neighbouring suburbs include Black Hills, Boyer, Bradys Lake, Butlers Gorge.

Most residents own outright (100%), while 0% own their home with a mortgage, while 0% rent. The median household income is $24,648 per year.

Tap water in Dee is supplied by TasWater. The suburb receives water via the Bothwell supply zone.

Water quality summary

Based on recent water quality reports, Dee achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 80.285714 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 7.385625, which is within the ADWG guideline range of 6.5–8.5. Chlorine, used for disinfection, measures 1.087187 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 185.714286 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.285938 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Black Hills , Boyer , Bradys Lake

Suburb snapshot

Population

7

Median Age

74 years

Median Income

$474 /week

Owner-occupied

100%

Recommended filters for Dee

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Dee's water

Ideal for Dee — removes chlorine taste and odour.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Dee's water

A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Dee's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Dee's water

Ideal for Dee — removes chlorine taste and odour.

How Dee compares

Compared to Tasmania and national averages

Metric Dee TAS Avg National Avg
Hardness 80.285714 mg/L 34.8 mg/L 85.1 mg/L
pH 7.385625 7.4 8.4
Fluoride 0.9 mg/L 0.7 mg/L
Chlorine 1.087187 mg/L
Turbidity 0.285938 NTU 0.3 NTU 0.4 NTU
TDS 185.714286 mg/L 93.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 46.857143 mg/L No limit Measured
Aluminium 0.011667 mg/L < 0.2 Good
Ammonia 0.002 mg/L No limit Measured
Antimony 0.001 mg/L No limit Measured
Arsenic 0.001 mg/L No limit Measured
Cadmium 0.0002 mg/L No limit Measured
Calcium 17.666667 mg/L No limit Measured
Chloride 78.666667 mg/L < 250 Good
Free Chlorine 1.087187 mg/L < 5 Good
Total Chlorine 1.356667 mg/L < 5 Good
Chromium 0.001 mg/L No limit Measured
Colour 2.428571 Pt-Co < 15 Good
Conductivity 318.571429 uS/cm No limit Measured
Copper 0.003667 mg/L < 2 Good
Cyanide 0.005 mg/L No limit Measured
E. coli 0 MPN/100ml < 0 Compliant
Hardness 80.285714 mg/L < 200 Good
Iron 0.01 mg/L < 0.3 Good
Lead 0.001 mg/L < 0.01 Good
Magnesium 11.3 mg/L No limit Measured
Manganese 0.0015 mg/L < 0.1 Good
Mercury 0.0001 mg/L No limit Measured
Nickel 0.001 mg/L No limit Measured
Nitrate 0.105571 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
pH 7.385625 pH units 6.5 – 8.5 Normal
Sodium 23.0005 mg/L < 180 Good
Sulfate 10.571429 mg/L < 500 Good
Temperature 12.5375 degrees C No limit Measured
Total Coliforms 0 MPN/100ml < 0 Compliant
Total Dissolved Solids 185.714286 mg/L < 600 Good
Trihalomethanes 0.047667 mg/L < 0.25 Good
Turbidity 0.285938 NTU < 5 Good
Zinc 0.001667 mg/L No limit Measured

Safety assessment

Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (80.285714 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Normal Range

pH Level

pH of 7.385625 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Data unavailable

Fluoride

Fluoride data is not currently available for Dee.

Chlorine

Disinfection

Chlorine measured at 1.087187 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Dee's chlorine level is 1.087187 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Soft Water Advantage

Dee's water is moderately hard at 80.285714 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Flush After Absence

If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.

Get water quality alerts

We'll email you when Dee's water data is updated.

Frequently asked questions

Is tap water safe to drink in Dee?
Yes, tap water in Dee is generally safe to drink. It scores 9.6 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by TasWater. Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Dee?
Water hardness in Dee is 80.285714 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Dee?
Dee is supplied by TasWater.
Does Dee water have fluoride?
Fluoride data is not currently available for Dee, TAS.
What is the water quality score for Dee?
Dee has a WaterScore of 9.6 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Dee?
The population of Dee, TAS is 7 according to the 2021 Australian Census. The median age of residents is 74 years.

Water utility

Utility
TasWater
Supply Zone
Bothwell
Data Source
TasWater — Bothwell

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.6 and 10.0

Utility reports average the grid — not your home

Dee's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Hobart and Tasmania

In-depth articles on the water supply that serves Dee

Explore more

Related pages for Dee, TAS

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 1.087187 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →