Renison Bell vs Zeehan

Side-by-side tap water quality comparison

Renison Bell, TAS

Quality Score

Supplied by TasWater

Zeehan, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Renison Bell scores 9.6/10 and Zeehan scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Renison Bell, TAS
Zeehan, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Renison Bell Zeehan Unit ADWG Guideline
Alkalinity 44.357143 Measured 52.5 Measured mg/L No limit
Aluminium 0.041667 Good 0.02375 Good mg/L < 0.2
Ammonia 0.002286 Measured 0.002583 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 18.833333 Measured 1.85 Measured mg/L No limit
Chloride 16.833333 Good 22 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.142857 Good 2.916667 Good Pt-Co < 15
Conductivity 159.285714 Measured 417.5 Measured uS/cm No limit
Copper 0.0185 Good 0.00725 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.823333 Good 1.026667 Good mg/L < 1.5
Free Chlorine 1.210938 Good 0.64875 Good mg/L < 5
Hardness 48.357143 Good 10.333333 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001167 Good 0.001 Good mg/L < 0.01
Magnesium 1.4 Measured 1.35 Measured mg/L No limit
Manganese 0.001 Good 0.006625 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.002125 Measured mg/L No limit
Nitrate 0.031746 Good 0.006833 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.313958 Normal 7.378438 Normal pH units 6.5 – 8.5
Sodium 12.8 Good 74.75 Good mg/L < 180
Sulfate 3.8 Good 108.333333 Good mg/L < 500
Temperature 12.760417 Measured 12.715625 Measured degrees C No limit
Total Chlorine 1.375 Good 0.975 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 94.5 Good 233.333333 Good mg/L < 600
Trihalomethanes 0.0565 Good 0.05625 Good mg/L < 0.25
Turbidity 0.269271 Good 0.345729 Good NTU < 5
Zinc 0.00625 Measured 0.027 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.