As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Zeehan, TAS

Postcode 7469 · Supplied by TasWater via Zeehan

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Zeehan

Zeehan is a suburb of 722 residents in Tasmania (postcode 7469). The median age is 48. It falls within the TasWater area. Neighbouring suburbs include Granville Harbour, Renison Bell, Trial Harbour, Rosebery.

Most residents own outright (39%), while 29% rent, while 25% own their home with a mortgage. The median household income is $49,452 per year. The top countries of birth for residents are United Kingdom (34%), New Zealand (11%), and Singapore (8%).

Tap water in Zeehan is supplied by TasWater. The suburb receives water via the Zeehan supply zone.

Water quality summary

Based on recent water quality reports, Zeehan achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 10.333333 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.378438, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.026667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.64875 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 233.333333 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.345729 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Granville Harbour , Renison Bell , Trial Harbour

Suburb snapshot

Population

722

Median Age

48 years

Median Income

$951 /week

Owner-occupied

63%

Recommended filters for Zeehan

Products matched to your water profile

Our top pick
ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Zeehan's water

Ideal for Zeehan — removes fluoride (currently 1.026667 mg/L).

Geekpure 5-Stage Under-Sink RO Drinking Water Filter System

Geekpure

5-Stage Under-Sink RO (75 GPD)

4.4 · 400 ratings on Amazon

Mid-range Matched to Zeehan's water

Ideal for Zeehan — removes fluoride (currently 1.026667 mg/L), removes chlorine taste and odour.

BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Zeehan's water

Ideal for Zeehan — removes chlorine taste and odour.

How Zeehan compares

Compared to Tasmania and national averages

Metric Zeehan TAS Avg National Avg
Hardness 10.333333 mg/L 34.8 mg/L 85.1 mg/L
pH 7.378438 7.4 8.4
Fluoride 1.026667 mg/L 0.9 mg/L 0.7 mg/L
Chlorine 0.64875 mg/L
Turbidity 0.345729 NTU 0.3 NTU 0.4 NTU
TDS 233.333333 mg/L 93.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 52.5 mg/L No limit Measured
Aluminium 0.02375 mg/L < 0.2 Good
Ammonia 0.002583 mg/L No limit Measured
Antimony 0.001 mg/L No limit Measured
Arsenic 0.001 mg/L No limit Measured
Cadmium 0.0002 mg/L No limit Measured
Calcium 1.85 mg/L No limit Measured
Chloride 22 mg/L < 250 Good
Free Chlorine 0.64875 mg/L < 5 Good
Total Chlorine 0.975 mg/L < 5 Good
Chromium 0.001 mg/L No limit Measured
Colour 2.916667 Pt-Co < 15 Good
Conductivity 417.5 uS/cm No limit Measured
Copper 0.00725 mg/L < 2 Good
Cyanide 0.005 mg/L No limit Measured
E. coli 0 MPN/100ml < 0 Compliant
Fluoride 1.026667 mg/L < 1.5 Good
Hardness 10.333333 mg/L < 200 Good
Iron 0.01 mg/L < 0.3 Good
Lead 0.001 mg/L < 0.01 Good
Magnesium 1.35 mg/L No limit Measured
Manganese 0.006625 mg/L < 0.1 Good
Mercury 0.0001 mg/L No limit Measured
Nickel 0.002125 mg/L No limit Measured
Nitrate 0.006833 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
pH 7.378438 pH units 6.5 – 8.5 Normal
Sodium 74.75 mg/L < 180 Good
Sulfate 108.333333 mg/L < 500 Good
Temperature 12.715625 degrees C No limit Measured
Total Coliforms 0 MPN/100ml < 0 Compliant
Total Dissolved Solids 233.333333 mg/L < 600 Good
Trihalomethanes 0.05625 mg/L < 0.25 Good
Turbidity 0.345729 NTU < 5 Good
Zinc 0.027 mg/L No limit Measured

Safety assessment

Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (10.333333 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.378438 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 1.026667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.64875 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Zeehan measures 0.64875 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Zeehan's water is soft at 10.333333 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 1.026667 mg/L in Zeehan. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Get water quality alerts

We'll email you when Zeehan's water data is updated.

Frequently asked questions

Is tap water safe to drink in Zeehan?
Yes, tap water in Zeehan is generally safe to drink. It scores 9.5 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by TasWater. Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Zeehan?
Water hardness in Zeehan is 10.333333 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Zeehan?
Zeehan is supplied by TasWater.
Does Zeehan water have fluoride?
Yes, water in Zeehan is fluoridated, with a fluoride level of 1.026667 mg/L. This is within the recommended range for dental health.
What is the water quality score for Zeehan?
Zeehan has a WaterScore of 9.5 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Zeehan?
The population of Zeehan, TAS is 722 according to the 2021 Australian Census. The median age of residents is 48 years.

Water utility

Utility
TasWater
Supply Zone
Zeehan
Data Source
TasWater — Zeehan

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.5 and 10.0

Utility reports average the grid — not your home

Zeehan's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Hobart and Tasmania

In-depth articles on the water supply that serves Zeehan

Explore more

Related pages for Zeehan, TAS

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Fluoride · 1.026667 mg/L — carbon won't help

iSpring · ★ 4.6 on Amazon

Remove fluoride →