Strahan vs Zeehan

Side-by-side tap water quality comparison

Strahan, TAS

Quality Score

Supplied by TasWater

Zeehan, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Strahan scores 9.6/10 and Zeehan scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Strahan, TAS
Zeehan, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Strahan Zeehan Unit ADWG Guideline
Alkalinity 34.714286 Measured 52.5 Measured mg/L No limit
Aluminium 0.033333 Good 0.02375 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002583 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 1.783333 Measured 1.85 Measured mg/L No limit
Chloride 28.833333 Good 22 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.214286 Good 2.916667 Good Pt-Co < 15
Conductivity 321.428571 Measured 417.5 Measured uS/cm No limit
Copper 0.006917 Good 0.00725 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.863333 Good 1.026667 Good mg/L < 1.5
Free Chlorine 0.606559 Good 0.64875 Good mg/L < 5
Hardness 12.857143 Good 10.333333 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 2.066667 Measured 1.35 Measured mg/L No limit
Manganese 0.004417 Good 0.006625 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001333 Measured 0.002125 Measured mg/L No limit
Nitrate 0.029429 Good 0.006833 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.284839 Normal 7.378438 Normal pH units 6.5 – 8.5
Sodium 55.5 Good 74.75 Good mg/L < 180
Sulfate 71.642857 Good 108.333333 Good mg/L < 500
Temperature 12.605376 Measured 12.715625 Measured degrees C No limit
Total Chlorine 0.7775 Good 0.975 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 189.285714 Good 233.333333 Good mg/L < 600
Trihalomethanes 0.056833 Good 0.05625 Good mg/L < 0.25
Turbidity 0.257957 Good 0.345729 Good NTU < 5
Zinc 0.012417 Measured 0.027 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.