Ulverstone vs Wilmot

Side-by-side tap water quality comparison

Ulverstone, TAS

Quality Score

Supplied by TasWater

Wilmot, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Ulverstone scores 9.6/10 and Wilmot scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Ulverstone, TAS
Wilmot, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Ulverstone Wilmot Unit ADWG Guideline
Alkalinity 6.958333 Measured 6.30303 Measured mg/L No limit
Aluminium 0.03375 Good 0.025385 Good mg/L < 0.2
Ammonia 0.002083 Measured 0.002061 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 9.75 Measured 9.269231 Measured mg/L No limit
Chloride 10 Good 7.461538 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.125 Good 2.121212 Good Pt-Co < 15
Conductivity 98.333333 Measured 83.151515 Measured uS/cm No limit
Copper 0.003938 Good 0.004 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.866667 Good 0.886667 Good mg/L < 1.5
Free Chlorine 1.105946 Good 1.062859 Good mg/L < 5
Hardness 30.166667 Good 25.909091 Good mg/L < 200
Iron 0.01375 Good 0.013077 Good mg/L < 0.3
Lead 0.001063 Good 0.001038 Good mg/L < 0.01
Magnesium 1.6125 Measured 1.015385 Measured mg/L No limit
Manganese 0.002312 Good 0.002885 Good mg/L < 0.1
Mercury 0.0001 Measured 0.000104 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.174708 Good 0.068303 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.292601 Normal 7.326645 Normal pH units 6.5 – 8.5
Sodium 4.2625 Good 3.407692 Good mg/L < 180
Sulfate 20.375 Good 15.242424 Good mg/L < 500
Temperature 14.70473 Measured 14.207188 Measured degrees C No limit
Total Chlorine 1.331786 Good 1.277273 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 64.416667 Good 55.333333 Good mg/L < 600
Trihalomethanes 0.054 Good 0.045692 Good mg/L < 0.25
Turbidity 0.40473 Good 0.349569 Good NTU < 5
Zinc 0.006375 Measured 0.006538 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.