Tap Water Quality in Ulverstone, TAS
Postcode 7315 · Supplied by TasWater via Ulverstone
Quality Score
About Ulverstone
Ulverstone is a suburb of 6,653 residents in Tasmania (postcode 7315). The median age is 49. It falls within the TasWater area. Neighbouring suburbs include Forth, Aberdeen, Ambleside, Devonport.
Most residents own outright (43%), while 27% own their home with a mortgage, while 26% rent. The median household income is $52,624 per year. The top countries of birth for residents are United Kingdom (44%), Netherlands (11%), and New Zealand (6%).
Tap water in Ulverstone is supplied by TasWater. The suburb receives water via the Ulverstone supply zone.
Water quality summary
Based on recent water quality reports, Ulverstone achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 30.166667 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.292601, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.866667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.105946 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 64.416667 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.40473 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Ulverstone
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Ulverstone — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Ulverstone's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Ulverstone — removes chlorine taste and odour.
Comparison
How Ulverstone compares
Compared to Tasmania and national averages
| Metric | Ulverstone | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 30.166667 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.292601 | 7.4 | 8.4 |
| Fluoride | 0.866667 mg/L | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 1.105946 mg/L | — | — |
| Turbidity | 0.40473 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 64.416667 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 6.958333 | mg/L | No limit | Measured |
| Aluminium | 0.03375 | mg/L | < 0.2 | Good |
| Ammonia | 0.002083 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 9.75 | mg/L | No limit | Measured |
| Chloride | 10 | mg/L | < 250 | Good |
| Free Chlorine | 1.105946 | mg/L | < 5 | Good |
| Total Chlorine | 1.331786 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.125 | Pt-Co | < 15 | Good |
| Conductivity | 98.333333 | uS/cm | No limit | Measured |
| Copper | 0.003938 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Fluoride | 0.866667 | mg/L | < 1.5 | Good |
| Hardness | 30.166667 | mg/L | < 200 | Good |
| Iron | 0.01375 | mg/L | < 0.3 | Good |
| Lead | 0.001063 | mg/L | < 0.01 | Good |
| Magnesium | 1.6125 | mg/L | No limit | Measured |
| Manganese | 0.002312 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.174708 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.292601 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 4.2625 | mg/L | < 180 | Good |
| Sulfate | 20.375 | mg/L | < 500 | Good |
| Temperature | 14.70473 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 64.416667 | mg/L | < 600 | Good |
| Trihalomethanes | 0.054 | mg/L | < 0.25 | Good |
| Turbidity | 0.40473 | NTU | < 5 | Good |
| Zinc | 0.006375 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (30.166667 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.292601 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.866667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.105946 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Ulverstone's chlorine level is 1.105946 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Ulverstone's water is soft at 30.166667 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.866667 mg/L in Ulverstone. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Ulverstone's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Ulverstone?
How hard is the water in Ulverstone?
What water utility supplies Ulverstone?
Does Ulverstone water have fluoride?
What is the water quality score for Ulverstone?
What is the population of Ulverstone?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Ulverstone
- Data Source
- TasWater — Ulverstone
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
Ulverstone's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Hobart and Tasmania
In-depth articles on the water supply that serves Ulverstone
Related
Explore more
Related pages for Ulverstone, TAS
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.