Tap Water Quality in Bakers Beach, TAS
Postcode 7307 · Supplied by TasWater via Forth
Quality Score
About Bakers Beach
Bakers Beach is a suburb of 72 residents in Tasmania (postcode 7307). The median age is 58. It falls within the TasWater area. Neighbouring suburbs include Harford, Hawley Beach, Latrobe, Moriarty.
Most residents own outright (68%), while 18% own their home with a mortgage, while 9% rent. The median household income is $55,900 per year. The top countries of birth for residents are United Kingdom (50%) and Netherlands (43%).
Tap water in Bakers Beach is supplied by TasWater. The suburb receives water via the Forth supply zone.
Water quality summary
Based on recent water quality reports, Bakers Beach achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 25.909091 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.326645, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.886667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.062859 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 55.333333 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.349569 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Harford , Hawley Beach , Latrobe
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Bakers Beach
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Bakers Beach — removes chlorine taste and odour.
Waterdrop
TSA Under-Sink Filter (Fluoride + PFAS)
4.4 · 2,237 ratings on Amazon
A reliable tsa under-sink filter (fluoride + pfas) suitable for Bakers Beach's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Bakers Beach — removes chlorine taste and odour.
Comparison
How Bakers Beach compares
Compared to Tasmania and national averages
| Metric | Bakers Beach | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 25.909091 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.326645 | 7.4 | 8.4 |
| Fluoride | 0.886667 mg/L | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 1.062859 mg/L | — | — |
| Turbidity | 0.349569 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 55.333333 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 6.30303 | mg/L | No limit | Measured |
| Aluminium | 0.025385 | mg/L | < 0.2 | Good |
| Ammonia | 0.002061 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 9.269231 | mg/L | No limit | Measured |
| Chloride | 7.461538 | mg/L | < 250 | Good |
| Free Chlorine | 1.062859 | mg/L | < 5 | Good |
| Total Chlorine | 1.277273 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.121212 | Pt-Co | < 15 | Good |
| Conductivity | 83.151515 | uS/cm | No limit | Measured |
| Copper | 0.004 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Fluoride | 0.886667 | mg/L | < 1.5 | Good |
| Hardness | 25.909091 | mg/L | < 200 | Good |
| Iron | 0.013077 | mg/L | < 0.3 | Good |
| Lead | 0.001038 | mg/L | < 0.01 | Good |
| Magnesium | 1.015385 | mg/L | No limit | Measured |
| Manganese | 0.002885 | mg/L | < 0.1 | Good |
| Mercury | 0.000104 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.068303 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.326645 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 3.407692 | mg/L | < 180 | Good |
| Sulfate | 15.242424 | mg/L | < 500 | Good |
| Temperature | 14.207188 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 55.333333 | mg/L | < 600 | Good |
| Trihalomethanes | 0.045692 | mg/L | < 0.25 | Good |
| Turbidity | 0.349569 | NTU | < 5 | Good |
| Zinc | 0.006538 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (25.909091 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.326645 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.886667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.062859 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Bakers Beach's chlorine level is 1.062859 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Bakers Beach's water is soft at 25.909091 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.886667 mg/L in Bakers Beach. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Bakers Beach's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Bakers Beach?
How hard is the water in Bakers Beach?
What water utility supplies Bakers Beach?
Does Bakers Beach water have fluoride?
What is the water quality score for Bakers Beach?
What is the population of Bakers Beach?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Forth
- Data Source
- TasWater — Forth
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.7 and 10.0
Utility reports average the grid — not your home
Bakers Beach's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Hobart and Tasmania
In-depth articles on the water supply that serves Bakers Beach
Related
Explore more
Related pages for Bakers Beach, TAS
Is tap water safe?
Safety assessment
Water hardness
25.909091 mg/L
Best water filter
Filter recommendations
Tasmania water quality
State coverage
TasWater
Water utility
Compare with Harford
Bakers Beach vs Harford
Compare with Hawley Beach
Bakers Beach vs Hawley Beach
Compare with Latrobe
Bakers Beach vs Latrobe
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.