Tap Water Quality in Bellara, QLD
Postcode 4507 · Supplied by Seqwater via Moreton
Quality Score
About Bellara
Bellara is a suburb of 3,278 residents in Queensland (postcode 4507). The median age is 59. It falls within the Seqwater area. Neighbouring suburbs include Bongaree, Sandstone Point, Godwin Beach, Woorim.
Most residents own outright (44%), while 32% rent, while 20% own their home with a mortgage. The median household income is $45,968 per year. The top countries of birth for residents are United Kingdom (39%), New Zealand (26%), and South Africa (3%).
Tap water in Bellara is supplied by Seqwater. The suburb receives water via the Moreton supply zone.
Water quality summary
Based on recent water quality reports, Bellara achieves a WaterScore of 8.4 out of 10, rated excellent overall. Water hardness measures 53 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 21.2, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.81 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.4 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Bongaree , Sandstone Point , Godwin Beach
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Bellara
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Bellara's water profile.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Bellara's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Bellara's water profile.
Comparison
How Bellara compares
Compared to Queensland and national averages
| Metric | Bellara | QLD Avg | National Avg |
|---|---|---|---|
| Hardness | 53 mg/L | 74.8 mg/L | 85.1 mg/L |
| pH | 21.2 | 23.6 | 8.4 |
| Fluoride | 0.81 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 0.4 mg/L | — | — |
| Turbidity | 0.3 NTU | 0.3 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.81 | mg/L | < 1.5 | Good |
| Free Chlorine | 0.4 | mg/L | < 5 | Good |
| Monochloramine | 2.5 | mg/L | < 3 | Near limit |
| Total Chlorine | 2.3 | mg/L | < 5 | Good |
| Bromate | 0.005 | mg/L | No limit | Measured |
| Chlorate | 0.14 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Nitrate | 0.116 | mg/L | < 50 | Good |
| Nitrite | 0.019 | mg/L | No limit | Measured |
| Trihalomethanes | 60.8 | µg/L | < 0.25 | Exceeds |
| Chloride | 7.3 | mg/L | < 250 | Good |
| Hardness | 53 | mg/L | < 200 | Good |
| Sodium | 20.8 | mg/L | < 180 | Good |
| pH | 21.2 | mg/L | 6.5 – 8.5 | Outside range |
| Aluminium | 0.024 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
| Calcium | 11.8 | mg/L | No limit | Measured |
| Magnesium | 5.75 | mg/L | No limit | Measured |
| Alkalinity | 59.5 | mg/L | No limit | Measured |
| Conductivity | 270.8 | µS/cm | No limit | Measured |
| Temperature | 27.4 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Safety
Safety assessment
Of 33 parameters tested, most fall within Australian Drinking Water Guidelines with 2 exceptions: Trihalomethanes at 60.8 µg/L and pH at 21.2 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (53 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Outside Range
pH Level
pH of 21.2 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.81 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.4 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Bellara measures 0.4 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Bellara's water is soft at 53 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.81 mg/L in Bellara. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Alkaline Water
pH measures 21.2 in Bellara, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.
Get water quality alerts
We'll email you when Bellara's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Bellara?
How hard is the water in Bellara?
What water utility supplies Bellara?
Does Bellara water have fluoride?
What is the water quality score for Bellara?
What is the population of Bellara?
Supplier
Water utility
- Utility
- Seqwater
- Supply Zone
- Moreton
- Data Source
- Seqwater — Moreton
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 7.4 and 9.4
Utility reports average the grid — not your home
Bellara's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Brisbane and South East Queensland
In-depth articles on the water supply that serves Bellara
Related
Explore more
Related pages for Bellara, QLD
Is tap water safe?
Safety assessment
Water hardness
53 mg/L
Best water filter
Filter recommendations
Queensland water quality
State coverage
Seqwater
Water utility
Compare with Bongaree
Bellara vs Bongaree
Compare with Sandstone Point
Bellara vs Sandstone Point
Compare with Godwin Beach
Bellara vs Godwin Beach
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Seqwater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.