Tap Water Quality in Bennettswood, VIC
Postcode 3125 · Supplied by Yarra Valley Water via Doncaster
Quality Score
About Bennettswood
Bennettswood is a suburb in Victoria, Australia (postcode 3125). It falls within the Melbourne North-East area. Neighbouring suburbs include Burwood, Surrey Hills South, Ashburton, Ashwood.
Tap water in Bennettswood is supplied by Yarra Valley Water. Yarra Valley Water serves Melbourne North-East. The suburb receives water via the Doncaster supply zone.
Water quality summary
Based on 2023-24 water quality reports, Bennettswood achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 19 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.4, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.69 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.31 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 2.95 NTU, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Burwood , Surrey Hills South , Ashburton
Recommended filters for Bennettswood
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Bennettswood's water profile.
ZeroWater
2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Bennettswood's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Bennettswood's water profile.
Comparison
How Bennettswood compares
Compared to Victoria and national averages
| Metric | Bennettswood | VIC Avg | National Avg |
|---|---|---|---|
| Hardness | 19 mg/L | 28 mg/L | 85.1 mg/L |
| pH | 7.4 | 7.4 | 8.4 |
| Fluoride | 0.69 mg/L | 0.7 mg/L | 0.7 mg/L |
| Chlorine | 0.31 mg/L | — | — |
| Turbidity | 2.95 NTU | 1.8 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Trihalomethanes | 0.07 | mg/L | < 0.25 | Good |
| Turbidity | 2.95 | NTU | < 5 | Good |
| Copper | 0.013 | mg/L | < 2 | Good |
| Fluoride | 0.69 | mg/L | < 1.5 | Good |
| Lead | 0.0003 | mg/L | < 0.01 | Good |
| Iron | 0.064 | mg/L | < 0.3 | Good |
| Zinc | 0.004 | mg/L | No limit | Measured |
| Hardness | 19 | mg/L CaCO3 | < 200 | Good |
| E. coli | 0 | MPN/100mL | < 0 | Compliant |
| Free Chlorine | 0.31 | mg/L | < 5 | Good |
| pH | 7.4 | pH units | 6.5 – 8.5 | Normal |
Safety
Safety assessment
Based on 11 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (19 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.4 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.69 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.31 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Bennettswood measures 0.31 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Bennettswood's water is soft at 19 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.69 mg/L in Bennettswood. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Sediment Filtration
Turbidity is 2.95 NTU in Bennettswood. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.
Get water quality alerts
We'll email you when Bennettswood's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Bennettswood?
How hard is the water in Bennettswood?
What water utility supplies Bennettswood?
Does Bennettswood water have fluoride?
What is the water quality score for Bennettswood?
Supplier
Water utility
- Utility
- Yarra Valley Water
- Service Area
- Melbourne North-East
- Supply Zone
- Doncaster
- Website
- www.yvw.com.au
- Data Source
- Yarra Valley Water — YVW Annual Water Quality Report 2023 24
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.4 and 10.0
Utility reports average the grid — not your home
Bennettswood's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Melbourne
In-depth articles on the water supply that serves Bennettswood
Related
Explore more
Related pages for Bennettswood, VIC
Is tap water safe?
Safety assessment
Water hardness
19 mg/L
Best water filter
Filter recommendations
Victoria water quality
State coverage
Yarra Valley Water
Water utility
Compare with Burwood
Bennettswood vs Burwood
Compare with Surrey Hills South
Bennettswood vs Surrey Hills South
Compare with Ashburton
Bennettswood vs Ashburton
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Yarra Valley Water (2023-24 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.