Tap Water Quality in Brookside Centre, QLD
Postcode 4053 · Supplied by Seqwater via Brisbane
Quality Score
About Brookside Centre
Brookside Centre is a suburb in Queensland, Australia (postcode 4053). It falls within the Seqwater area. Neighbouring suburbs include Everton Hills, Mcdowall, Oxford Park, Somerset Hills.
Tap water in Brookside Centre is supplied by Seqwater. The suburb receives water via the Brisbane supply zone.
Water quality summary
Based on recent water quality reports, Brookside Centre achieves a WaterScore of 9.2 out of 10, rated excellent overall. Water hardness measures 114.8 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The water is fluoridated at 0.85 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Everton Hills , Mcdowall , Oxford Park
Recommended filters for Brookside Centre
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Brookside Centre — removes chlorine taste and odour.
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for Brookside Centre's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Brookside Centre — removes chlorine taste and odour.
Comparison
How Brookside Centre compares
Compared to Queensland and national averages
| Metric | Brookside Centre | QLD Avg | National Avg |
|---|---|---|---|
| Hardness | 114.8 mg/L | 76.3 mg/L | 85.3 mg/L |
| pH | — | 6.2 | 7.8 |
| Fluoride | 0.85 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 1.1 mg/L | — | — |
| Turbidity | 0.3 NTU | 0.3 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.85 | mg/L | < 1.5 | Good |
| Free Chlorine | 1.1 | mg/L | < 5 | Good |
| Monochloramine | 3 | mg/L | < 3 | Near limit |
| Total Chlorine | 3 | mg/L | < 5 | Good |
| Chlorate | 0.032 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.003 | mg/L | < 0.1 | Good |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Nitrate | 0.027 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| Trihalomethanes | 0.1125 | mg/L | < 0.25 | Good |
| Chloride | 83.5 | mg/L | < 250 | Good |
| Hardness | 114.8 | mg/L | < 200 | Good |
| Sodium | 43.5 | mg/L | < 180 | Good |
| Aluminium | 0.053 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1.6 | HU | < 15 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
| Calcium | 23.8 | mg/L | No limit | Measured |
| Magnesium | 12.93 | mg/L | No limit | Measured |
| Alkalinity | 92 | mg/L | No limit | Measured |
| Conductivity | 497.2 | µS/cm | No limit | Measured |
| Temperature | 29.3 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Safety
Safety assessment
Based on 30 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Moderately hard (114.8 mg/L)
Water Hardness
Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
Data unavailable
pH Level
pH data is not currently available for Brookside Centre.
Fluoridated
Fluoride
Fluoride at 0.85 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Brookside Centre's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Brookside Centre's water is moderately hard at 114.8 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.85 mg/L in Brookside Centre. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Brookside Centre's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Brookside Centre?
How hard is the water in Brookside Centre?
What water utility supplies Brookside Centre?
Does Brookside Centre water have fluoride?
What is the water quality score for Brookside Centre?
Supplier
Water utility
- Utility
- Seqwater
- Supply Zone
- Brisbane
- Data Source
- Seqwater — Brisbane
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.2 and 10.0
Utility reports average the grid — not your home
Brookside Centre's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Brisbane and South East Queensland
In-depth articles on the water supply that serves Brookside Centre
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Brookside Centre, QLD [Data set]. Compiled from Seqwater data (annual report). https://waterscore.com.au/water-quality/brookside-centre-qld/
Embed
Add Brookside Centre, QLD water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Brookside Centre, QLD
Is tap water safe?
Safety assessment
Water hardness
114.8 mg/L
Best water filter
Filter recommendations
Queensland water quality
State coverage
Seqwater
Water utility
Compare with Everton Hills
Brookside Centre vs Everton Hills
Compare with Mcdowall
Brookside Centre vs Mcdowall
Compare with Oxford Park
Brookside Centre vs Oxford Park
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Seqwater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.