As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Cannon Hill, QLD

Postcode 4170 · Supplied by Seqwater via Brisbane

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Cannon Hill

Cannon Hill is a suburb of 6,701 residents in Queensland (postcode 4170). The median age is 34. It falls within the Seqwater area. Neighbouring suburbs include Colmslie, Norman Park, Seven Hills, Morningside.

Most residents own their home with a mortgage (38%), while 38% rent, while 23% own outright. The median household income is $122,564 per year. The top countries of birth for residents are United Kingdom (18%), New Zealand (16%), and India (8%).

Tap water in Cannon Hill is supplied by Seqwater. The suburb receives water via the Brisbane supply zone.

Water quality summary

Based on recent water quality reports, Cannon Hill achieves a WaterScore of 8.2 out of 10, rated excellent overall. Water hardness measures 114.8 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 34.5, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.85 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Colmslie , Norman Park , Seven Hills

Suburb snapshot

Population

6,701

Median Age

34 years

Median Income

$2,357 /week

Owner-occupied

60%

Recommended filters for Cannon Hill

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Cannon Hill's water

Ideal for Cannon Hill — removes chlorine taste and odour.

Waterdrop TSA 8-Layer Under-Sink Water Filter System

Waterdrop

TSA Under-Sink Filter (Fluoride + PFAS)

4.4 · 2,237 ratings on Amazon

Mid-range Matched to Cannon Hill's water

A reliable tsa under-sink filter (fluoride + pfas) suitable for Cannon Hill's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Cannon Hill's water

Ideal for Cannon Hill — removes chlorine taste and odour.

How Cannon Hill compares

Compared to Queensland and national averages

Metric Cannon Hill QLD Avg National Avg
Hardness 114.8 mg/L 74.8 mg/L 85.1 mg/L
pH 34.5 23.6 8.4
Fluoride 0.85 mg/L 0.8 mg/L 0.7 mg/L
Chlorine 1.1 mg/L
Turbidity 0.3 NTU 0.3 NTU 0.4 NTU
TDS 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Fluoride 0.85 mg/L < 1.5 Good
Free Chlorine 1.1 mg/L < 5 Good
Monochloramine 3 mg/L < 3 Near limit
Total Chlorine 3 mg/L < 5 Good
Chlorate 0.032 mg/L No limit Measured
Arsenic 0.0005 mg/L No limit Measured
Cadmium 0.0001 mg/L No limit Measured
Chromium 0.001 mg/L No limit Measured
Copper 0.001 mg/L < 2 Good
Lead 0.001 mg/L < 0.01 Good
Manganese 0.003 mg/L < 0.1 Good
Nickel 0.001 mg/L No limit Measured
E. coli 0 CFU/100mL < 0 Compliant
Nitrate 0.027 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
Trihalomethanes 112.5 µg/L < 0.25 Exceeds
Chloride 83.5 mg/L < 250 Good
Hardness 114.8 mg/L < 200 Good
Sodium 43.5 mg/L < 180 Good
pH 34.5 mg/L 6.5 – 8.5 Outside range
Aluminium 0.053 mg/L < 0.2 Good
Iron 0.01 mg/L < 0.3 Good
Zinc 0.005 mg/L No limit Measured
Colour 1.6 HU < 15 Good
Turbidity 0.3 NTU < 5 Good
Calcium 23.8 mg/L No limit Measured
Magnesium 12.93 mg/L No limit Measured
Alkalinity 92 mg/L No limit Measured
Conductivity 497.2 µS/cm No limit Measured
Temperature 29.3 °C No limit Measured
Ndma 0.003 µg/L No limit Measured

Safety assessment

Of 31 parameters tested, most fall within Australian Drinking Water Guidelines with 2 exceptions: Trihalomethanes at 112.5 µg/L and pH at 34.5 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (114.8 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 34.5 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.85 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Cannon Hill's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Soft Water Advantage

Cannon Hill's water is moderately hard at 114.8 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.85 mg/L in Cannon Hill. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Alkaline Water

pH measures 34.5 in Cannon Hill, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.

Get water quality alerts

We'll email you when Cannon Hill's water data is updated.

Frequently asked questions

Is tap water safe to drink in Cannon Hill?
Yes, tap water in Cannon Hill is generally safe to drink. It scores 8.2 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Seqwater. Of 31 parameters tested, most fall within Australian Drinking Water Guidelines with 2 exceptions: Trihalomethanes at 112.5 µg/L and pH at 34.5 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Cannon Hill?
Water hardness in Cannon Hill is 114.8 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Cannon Hill?
Cannon Hill is supplied by Seqwater.
Does Cannon Hill water have fluoride?
Yes, water in Cannon Hill is fluoridated, with a fluoride level of 0.85 mg/L. This is within the recommended range for dental health.
What is the water quality score for Cannon Hill?
Cannon Hill has a WaterScore of 8.2 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Cannon Hill?
The population of Cannon Hill, QLD is 6,701 according to the 2021 Australian Census. The median age of residents is 34 years.

Water utility

Utility
Seqwater
Supply Zone
Brisbane
Data Source
Seqwater — Brisbane

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.2 and 9.2

Utility reports average the grid — not your home

Cannon Hill's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Brisbane and South East Queensland

In-depth articles on the water supply that serves Cannon Hill

Explore more

Related pages for Cannon Hill, QLD

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Seqwater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 1.1 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →