As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Crabtree, TAS

Postcode 7109 · Supplied by TasWater via Huonville

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Crabtree

Crabtree is a suburb of 308 residents in Tasmania (postcode 7109). The median age is 40. It falls within the TasWater area. Neighbouring suburbs include Catamaran, Cradoc, Glaziers Bay, Glen Huon.

Most residents own their home with a mortgage (51%), while 36% own outright, while 9% rent. The median household income is $84,500 per year. The top countries of birth for residents are United Kingdom (46%), Germany (15%), and South Africa (13%).

Tap water in Crabtree is supplied by TasWater. The suburb receives water via the Huonville supply zone.

Water quality summary

Based on recent water quality reports, Crabtree achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 22.645161 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.591733, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.846667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.940937 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 120.064516 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.302833 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Catamaran , Cradoc , Glaziers Bay

Suburb snapshot

Population

308

Median Age

40 years

Median Income

$1,625 /week

Owner-occupied

87%

Recommended filters for Crabtree

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Crabtree's water

Ideal for Crabtree — removes chlorine taste and odour.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Crabtree's water

A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Crabtree's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Crabtree's water

Ideal for Crabtree — removes chlorine taste and odour.

How Crabtree compares

Compared to Tasmania and national averages

Metric Crabtree TAS Avg National Avg
Hardness 22.645161 mg/L 34.8 mg/L 85.1 mg/L
pH 7.591733 7.4 8.4
Fluoride 0.846667 mg/L 0.9 mg/L 0.7 mg/L
Chlorine 0.940937 mg/L
Turbidity 0.302833 NTU 0.3 NTU 0.4 NTU
TDS 120.064516 mg/L 93.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 37 mg/L No limit Measured
Aluminium 0.017391 mg/L < 0.2 Good
Ammonia 0.002129 mg/L No limit Measured
Antimony 0.001 mg/L No limit Measured
Arsenic 0.001 mg/L No limit Measured
Cadmium 0.0002 mg/L No limit Measured
Calcium 5.541667 mg/L No limit Measured
Chloride 13 mg/L < 250 Good
Free Chlorine 0.940937 mg/L < 5 Good
Total Chlorine 1 mg/L < 5 Good
Chromium 0.001 mg/L No limit Measured
Colour 2.322581 Pt-Co < 15 Good
Conductivity 204 uS/cm No limit Measured
Copper 0.006739 mg/L < 2 Good
Cyanide 0.005 mg/L No limit Measured
E. coli 0 MPN/100ml < 0 Compliant
Fluoride 0.846667 mg/L < 1.5 Good
Hardness 22.645161 mg/L < 200 Good
Iron 0.015217 mg/L < 0.3 Good
Lead 0.001 mg/L < 0.01 Good
Magnesium 2.55 mg/L No limit Measured
Manganese 0.002217 mg/L < 0.1 Good
Mercury 0.0001 mg/L No limit Measured
Nickel 0.001 mg/L No limit Measured
Nitrate 0.00929 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
pH 7.591733 pH units 6.5 – 8.5 Normal
Sodium 28.375 mg/L < 180 Good
Sulfate 37.258065 mg/L < 500 Good
Temperature 12.709091 degrees C No limit Measured
Total Coliforms 0 MPN/100ml < 0 Compliant
Total Dissolved Solids 120.064516 mg/L < 600 Good
Trihalomethanes 0.040364 mg/L < 0.25 Good
Turbidity 0.302833 NTU < 5 Good
Zinc 0.004435 mg/L No limit Measured

Safety assessment

Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (22.645161 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.591733 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.846667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.940937 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Crabtree measures 0.940937 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Crabtree's water is soft at 22.645161 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.846667 mg/L in Crabtree. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Get water quality alerts

We'll email you when Crabtree's water data is updated.

Frequently asked questions

Is tap water safe to drink in Crabtree?
Yes, tap water in Crabtree is generally safe to drink. It scores 9.7 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by TasWater. Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Crabtree?
Water hardness in Crabtree is 22.645161 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Crabtree?
Crabtree is supplied by TasWater.
Does Crabtree water have fluoride?
Yes, water in Crabtree is fluoridated, with a fluoride level of 0.846667 mg/L. This is within the recommended range for dental health.
What is the water quality score for Crabtree?
Crabtree has a WaterScore of 9.7 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Crabtree?
The population of Crabtree, TAS is 308 according to the 2021 Australian Census. The median age of residents is 40 years.

Water utility

Utility
TasWater
Supply Zone
Huonville
Data Source
TasWater — Huonville

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.7 and 10.0

Utility reports average the grid — not your home

Crabtree's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Hobart and Tasmania

In-depth articles on the water supply that serves Crabtree

Explore more

Related pages for Crabtree, TAS

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 0.940937 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →