Tap Water Quality in Harper Creek, QLD
Postcode 4552 · Supplied by Seqwater via Sunshine Coast
Quality Score
About Harper Creek
Harper Creek is a suburb in Queensland, Australia (postcode 4552). It falls within the Seqwater area. Neighbouring suburbs include Bald Knob, Balmoral Ridge, Baroon Pocket, Booroobin.
Tap water in Harper Creek is supplied by Seqwater. The suburb receives water via the Sunshine Coast supply zone.
Water quality summary
Based on recent water quality reports, Harper Creek achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 52.3 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The water is fluoridated at 0.83 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.6 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.4 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Bald Knob , Balmoral Ridge , Baroon Pocket
Recommended filters for Harper Creek
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Harper Creek — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Harper Creek's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Harper Creek — removes chlorine taste and odour.
Comparison
How Harper Creek compares
Compared to Queensland and national averages
| Metric | Harper Creek | QLD Avg | National Avg |
|---|---|---|---|
| Hardness | 52.3 mg/L | 74.8 mg/L | 85.1 mg/L |
| pH | — | 6.2 | 7.8 |
| Fluoride | 0.83 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 1.6 mg/L | — | — |
| Turbidity | 0.4 NTU | 0.3 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.83 | mg/L | < 1.5 | Good |
| Free Chlorine | 1.6 | mg/L | < 5 | Good |
| Monochloramine | 3.5 | mg/L | < 3 | Exceeds |
| Total Chlorine | 2.1 | mg/L | < 5 | Good |
| Bromate | 0.005 | mg/L | No limit | Measured |
| Chlorate | 0.085 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Nitrate | 0.052 | mg/L | < 50 | Good |
| Nitrite | 0.004 | mg/L | No limit | Measured |
| Trihalomethanes | 0.0343 | mg/L | < 0.25 | Good |
| Chloride | 26.6 | mg/L | < 250 | Good |
| Hardness | 52.3 | mg/L | < 200 | Good |
| Sodium | 16.3 | mg/L | < 180 | Good |
| Aluminium | 0.008 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.4 | NTU | < 5 | Good |
| Calcium | 12.6 | mg/L | No limit | Measured |
| Magnesium | 5.25 | mg/L | No limit | Measured |
| Alkalinity | 49 | mg/L | No limit | Measured |
| Conductivity | 235.6 | µS/cm | No limit | Measured |
| Temperature | 26.7 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Safety
Safety assessment
Of 32 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: Monochloramine at 3.5 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (52.3 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Data unavailable
pH Level
pH data is not currently available for Harper Creek.
Fluoridated
Fluoride
Fluoride at 0.83 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.6 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Harper Creek's chlorine level is 1.6 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Harper Creek's water is soft at 52.3 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.83 mg/L in Harper Creek. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Harper Creek's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Harper Creek?
How hard is the water in Harper Creek?
What water utility supplies Harper Creek?
Does Harper Creek water have fluoride?
What is the water quality score for Harper Creek?
Supplier
Water utility
- Utility
- Seqwater
- Supply Zone
- Sunshine Coast
- Data Source
- Seqwater — Sunshine Coast
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Harper Creek's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for the Sunshine Coast and Noosa
In-depth articles on the water supply that serves Harper Creek
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Harper Creek, QLD [Data set]. Compiled from Seqwater data (annual report). https://waterscore.com.au/water-quality/harper-creek-qld/
Embed
Add Harper Creek, QLD water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Harper Creek, QLD
Is tap water safe?
Safety assessment
Water hardness
52.3 mg/L
Best water filter
Filter recommendations
Queensland water quality
State coverage
Seqwater
Water utility
Compare with Bald Knob
Harper Creek vs Bald Knob
Compare with Balmoral Ridge
Harper Creek vs Balmoral Ridge
Compare with Baroon Pocket
Harper Creek vs Baroon Pocket
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Seqwater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.