Tap Water Quality in Perth Gpo, WA
Postcode 6000 · Supplied by Water Corporation via Mt Eliza
Quality Score
About Perth Gpo
Perth Gpo is a suburb in Western Australia, Australia (postcode 6000). It falls within the Water Corporation area. Neighbouring suburbs include City Delivery Centre, Perth, Perth St Georges Tce, Cloisters Square Po.
Tap water in Perth Gpo is supplied by Water Corporation. The suburb receives water via the Mt Eliza supply zone.
Water quality summary
Based on 2024-25 water quality reports, Perth Gpo achieves a WaterScore of 9.2 out of 10, rated excellent overall. Water hardness measures 57 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.95, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.81 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Total dissolved solids (TDS) measure 349 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.2 NTU, indicating clear water, within the ADWG guideline of 5 NTU.
Compare with nearby suburbs: City Delivery Centre , Perth , Perth St Georges Tce
Recommended filters for Perth Gpo
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Perth Gpo's water profile.
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for Perth Gpo's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Perth Gpo's water profile.
Comparison
How Perth Gpo compares
Compared to Western Australia and national averages
| Metric | Perth Gpo | WA Avg | National Avg |
|---|---|---|---|
| Hardness | 57 mg/L | 99.8 mg/L | 80.3 mg/L |
| pH | 7.95 | 7.9 | 7.8 |
| Fluoride | 0.81 mg/L | 0.7 mg/L | 0.7 mg/L |
| Turbidity | 0.2 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 349 mg/L | 434.2 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 55 | mg/L CaCO3 | No limit | Measured |
| Aluminium | 0.009 | mg/L | < 0.2 | Good |
| Chloride | 150 | mg/L | < 250 | Good |
| Hardness | 57 | mg/L CaCO3 | < 200 | Good |
| Iron | 0.046 | mg/L | < 0.3 | Good |
| Manganese | 0.007 | mg/L | < 0.1 | Good |
| pH | 7.95 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 89 | mg/L | < 180 | Good |
| Sulfate | 12 | mg/L | < 500 | Good |
| Total Dissolved Solids | 349 | mg/L | < 600 | Good |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.2 | NTU | < 5 | Good |
| Fluoride | 0.81 | mg/L | < 1.5 | Good |
| Nitrate | 0.2 | mg/L | < 50 | Good |
| Trihalomethanes | 0.06 | mg/L | < 0.25 | Good |
Safety
Safety assessment
Based on 15 parameters tested, all results fall within Australian Drinking Water Guidelines.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (57 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.95 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.81 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Data unavailable
Disinfection
Chlorine data is not currently available for Perth Gpo.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Soft Water Advantage
Perth Gpo's water is soft at 57 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.81 mg/L in Perth Gpo. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 349 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Get water quality alerts
We'll email you when Perth Gpo's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Perth Gpo?
How hard is the water in Perth Gpo?
What water utility supplies Perth Gpo?
Does Perth Gpo water have fluoride?
What is the water quality score for Perth Gpo?
Supplier
Water utility
- Utility
- Water Corporation
- Supply Zone
- Mt Eliza
- Data Source
- Water Corporation — WC Perth Aesthetic Tables 2024 25, WC Perth Health Tables 2024 25
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.2 and 10.0
Utility reports average the grid — not your home
Perth Gpo's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Perth and WA
In-depth articles on the water supply that serves Perth Gpo
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Perth Gpo, WA [Data set]. Compiled from Water Corporation data (2024-25 annual report). https://waterscore.com.au/water-quality/perth-gpo-wa/
Embed
Add Perth Gpo, WA water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Perth Gpo, WA
Is tap water safe?
Safety assessment
Water hardness
57 mg/L
Best water filter
Filter recommendations
Western Australia water quality
State coverage
Water Corporation
Water utility
Compare with Coolbinia
Perth Gpo vs Coolbinia
Compare with Menora
Perth Gpo vs Menora
Compare with Mount Lawley
Perth Gpo vs Mount Lawley
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Water Corporation (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.