Tap Water Quality in Port Arthur, TAS
Postcode 7182 · Supplied by TasWater via Coal Valley Greater Hobart
Quality Score
About Port Arthur
Port Arthur is a suburb of 247 residents in Tasmania (postcode 7182). The median age is 57. It falls within the TasWater area. Neighbouring suburbs include Fortescue, Cape Raoul, Highcroft, Cape Pillar.
Most residents own outright (53%), while 19% own their home with a mortgage, while 15% rent. The median household income is $47,424 per year. The top countries of birth for residents are United Kingdom (34%), Philippines (25%), and Nepal (19%).
Tap water in Port Arthur is supplied by TasWater. The suburb receives water via the Coal Valley Greater Hobart supply zone.
Water quality summary
Based on recent water quality reports, Port Arthur achieves a WaterScore of 9.8 out of 10, rated excellent overall. Water hardness measures 45.857143 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.559231, which is within the ADWG guideline range of 6.5–8.5. Chlorine, used for disinfection, measures 0.495192 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 82.714286 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.224103 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Fortescue , Cape Raoul , Highcroft
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Port Arthur
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Port Arthur's water profile.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Port Arthur's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Port Arthur's water profile.
Comparison
How Port Arthur compares
Compared to Tasmania and national averages
| Metric | Port Arthur | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 45.857143 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.559231 | 7.4 | 8.4 |
| Fluoride | — | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 0.495192 mg/L | — | — |
| Turbidity | 0.224103 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 82.714286 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 22.214286 | mg/L | No limit | Measured |
| Aluminium | 0.033333 | mg/L | < 0.2 | Good |
| Ammonia | 0.002 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 15.75 | mg/L | No limit | Measured |
| Chloride | 10 | mg/L | < 250 | Good |
| Free Chlorine | 0.495192 | mg/L | < 5 | Good |
| Total Chlorine | 0.6625 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2 | Pt-Co | < 15 | Good |
| Conductivity | 125 | uS/cm | No limit | Measured |
| Copper | 0.001083 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Hardness | 45.857143 | mg/L | < 200 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Magnesium | 1.775 | mg/L | No limit | Measured |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.046214 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.559231 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 5.15 | mg/L | < 180 | Good |
| Sulfate | 25.714286 | mg/L | < 500 | Good |
| Temperature | 13.251282 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 82.714286 | mg/L | < 600 | Good |
| Trihalomethanes | 0.030333 | mg/L | < 0.25 | Good |
| Turbidity | 0.224103 | NTU | < 5 | Good |
| Zinc | 0.001417 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (45.857143 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.559231 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Data unavailable
Fluoride
Fluoride data is not currently available for Port Arthur.
Chlorine
Disinfection
Chlorine measured at 0.495192 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Port Arthur measures 0.495192 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Port Arthur's water is soft at 45.857143 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Flush After Absence
If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.
Get water quality alerts
We'll email you when Port Arthur's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Port Arthur?
How hard is the water in Port Arthur?
What water utility supplies Port Arthur?
Does Port Arthur water have fluoride?
What is the water quality score for Port Arthur?
What is the population of Port Arthur?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Coal Valley Greater Hobart
- Data Source
- TasWater — Coal Valley Greater Hobart
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.8 and 10.0
Utility reports average the grid — not your home
Port Arthur's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Hobart and Tasmania
In-depth articles on the water supply that serves Port Arthur
Related
Explore more
Related pages for Port Arthur, TAS
Is tap water safe?
Safety assessment
Water hardness
45.857143 mg/L
Best water filter
Filter recommendations
Tasmania water quality
State coverage
TasWater
Water utility
Compare with Fortescue
Port Arthur vs Fortescue
Compare with Cape Raoul
Port Arthur vs Cape Raoul
Compare with Highcroft
Port Arthur vs Highcroft
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.