Tap Water Quality in Royal George, TAS
Postcode 7213 · Supplied by TasWater via Rossarden
Quality Score
About Royal George
Royal George is a suburb of 59 residents in Tasmania (postcode 7213). The median age is 39. It falls within the TasWater area. Neighbouring suburbs include Avoca, Storys Creek, Mangana, Upper Esk.
Most residents rent (44%), while 30% own outright, while 17% own their home with a mortgage. The median household income is $71,500 per year.
Tap water in Royal George is supplied by TasWater. The suburb receives water via the Rossarden supply zone.
Water quality summary
Based on recent water quality reports, Royal George achieves a WaterScore of 9.8 out of 10, rated excellent overall. Water hardness measures 45.583333 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.354844, which is within the ADWG guideline range of 6.5–8.5. Chlorine, used for disinfection, measures 0.869844 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 69.75 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.196094 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Avoca , Storys Creek , Mangana
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Royal George
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Royal George — removes chlorine taste and odour.
Waterdrop
TSA Under-Sink Filter (Fluoride + PFAS)
4.4 · 2,237 ratings on Amazon
A reliable tsa under-sink filter (fluoride + pfas) suitable for Royal George's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Royal George — removes chlorine taste and odour.
Comparison
How Royal George compares
Compared to Tasmania and national averages
| Metric | Royal George | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 45.583333 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.354844 | 7.4 | 8.4 |
| Fluoride | — | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 0.869844 mg/L | — | — |
| Turbidity | 0.196094 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 69.75 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 46.666667 | mg/L | No limit | Measured |
| Aluminium | 0.01 | mg/L | < 0.2 | Good |
| Ammonia | 0.002 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 16 | mg/L | No limit | Measured |
| Chloride | 5.5 | mg/L | < 250 | Good |
| Free Chlorine | 0.869844 | mg/L | < 5 | Good |
| Total Chlorine | 0.912857 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.166667 | Pt-Co | < 15 | Good |
| Conductivity | 112.833333 | uS/cm | No limit | Measured |
| Copper | 0.005625 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Hardness | 45.583333 | mg/L | < 200 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Magnesium | 0.95 | mg/L | No limit | Measured |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.018417 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.354844 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 3.55 | mg/L | < 180 | Good |
| Sulfate | 1 | mg/L | < 500 | Good |
| Temperature | 12.157813 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 69.75 | mg/L | < 600 | Good |
| Trihalomethanes | 0.0205 | mg/L | < 0.25 | Good |
| Turbidity | 0.196094 | NTU | < 5 | Good |
| Zinc | 0.0045 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (45.583333 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.354844 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Data unavailable
Fluoride
Fluoride data is not currently available for Royal George.
Chlorine
Disinfection
Chlorine measured at 0.869844 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Royal George measures 0.869844 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Royal George's water is soft at 45.583333 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Flush After Absence
If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.
Get water quality alerts
We'll email you when Royal George's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Royal George?
How hard is the water in Royal George?
What water utility supplies Royal George?
Does Royal George water have fluoride?
What is the water quality score for Royal George?
What is the population of Royal George?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Rossarden
- Data Source
- TasWater — Rossarden
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.8 and 10.0
Utility reports average the grid — not your home
Royal George's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Hobart and Tasmania
In-depth articles on the water supply that serves Royal George
Related
Explore more
Related pages for Royal George, TAS
Is tap water safe?
Safety assessment
Water hardness
45.583333 mg/L
Best water filter
Filter recommendations
Tasmania water quality
State coverage
TasWater
Water utility
Compare with Avoca
Royal George vs Avoca
Compare with Storys Creek
Royal George vs Storys Creek
Compare with Mangana
Royal George vs Mangana
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.