Tap Water Quality in Scotts Point, QLD
Postcode 4019 · Supplied by Seqwater via Moreton
Quality Score
About Scotts Point
Scotts Point is a suburb in Queensland, Australia (postcode 4019). It falls within the Seqwater area. Neighbouring suburbs include Clontarf Beach, Humpybong, Margate Beach, Clontarf.
Tap water in Scotts Point is supplied by Seqwater. The suburb receives water via the Moreton supply zone.
Water quality summary
Based on recent water quality reports, Scotts Point achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 53 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The water is fluoridated at 0.81 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.4 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Clontarf Beach , Humpybong , Margate Beach
Recommended filters for Scotts Point
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Scotts Point's water profile.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Scotts Point's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Scotts Point's water profile.
Comparison
How Scotts Point compares
Compared to Queensland and national averages
| Metric | Scotts Point | QLD Avg | National Avg |
|---|---|---|---|
| Hardness | 53 mg/L | 76.3 mg/L | 85.3 mg/L |
| pH | — | 6.2 | 7.8 |
| Fluoride | 0.81 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 0.4 mg/L | — | — |
| Turbidity | 0.3 NTU | 0.3 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.81 | mg/L | < 1.5 | Good |
| Free Chlorine | 0.4 | mg/L | < 5 | Good |
| Monochloramine | 2.5 | mg/L | < 3 | Near limit |
| Total Chlorine | 2.3 | mg/L | < 5 | Good |
| Bromate | 0.005 | mg/L | No limit | Measured |
| Chlorate | 0.14 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Nitrate | 0.116 | mg/L | < 50 | Good |
| Nitrite | 0.019 | mg/L | No limit | Measured |
| Trihalomethanes | 0.0608 | mg/L | < 0.25 | Good |
| Chloride | 7.3 | mg/L | < 250 | Good |
| Hardness | 53 | mg/L | < 200 | Good |
| Sodium | 20.8 | mg/L | < 180 | Good |
| Aluminium | 0.024 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
| Calcium | 11.8 | mg/L | No limit | Measured |
| Magnesium | 5.75 | mg/L | No limit | Measured |
| Alkalinity | 59.5 | mg/L | No limit | Measured |
| Conductivity | 270.8 | µS/cm | No limit | Measured |
| Temperature | 27.4 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Safety
Safety assessment
Based on 32 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (53 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Data unavailable
pH Level
pH data is not currently available for Scotts Point.
Fluoridated
Fluoride
Fluoride at 0.81 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.4 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Scotts Point measures 0.4 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Scotts Point's water is soft at 53 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.81 mg/L in Scotts Point. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Scotts Point's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Scotts Point?
How hard is the water in Scotts Point?
What water utility supplies Scotts Point?
Does Scotts Point water have fluoride?
What is the water quality score for Scotts Point?
Supplier
Water utility
- Utility
- Seqwater
- Supply Zone
- Moreton
- Data Source
- Seqwater — Moreton
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Scotts Point's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Brisbane and South East Queensland
In-depth articles on the water supply that serves Scotts Point
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Scotts Point, QLD [Data set]. Compiled from Seqwater data (annual report). https://waterscore.com.au/water-quality/scotts-point-qld/
Embed
Add Scotts Point, QLD water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Scotts Point, QLD
Is tap water safe?
Safety assessment
Water hardness
53 mg/L
Best water filter
Filter recommendations
Queensland water quality
State coverage
Seqwater
Water utility
Compare with Clontarf Beach
Scotts Point vs Clontarf Beach
Compare with Humpybong
Scotts Point vs Humpybong
Compare with Margate Beach
Scotts Point vs Margate Beach
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Seqwater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.