Tap Water Quality in Taylors Lakes, VIC
Postcode 3038 · Supplied by Greater Western Water via Taylors Lakes
Quality Score
About Taylors Lakes
Taylors Lakes is a suburb of 15,174 residents in Victoria (postcode 3038). The median age is 45. It falls within the Greater Western Water area. Neighbouring suburbs include Watergardens, Sydenham, Keilor Lodge, Delahey.
Most residents own outright (50%), while 36% own their home with a mortgage, while 10% rent. The median household income is $112,528 per year. The top countries of birth for residents are India (10%), Italy (9%), and North Macedonia (7%).
Tap water in Taylors Lakes is supplied by Greater Western Water. The suburb receives water via the Taylors Lakes supply zone.
Water quality summary
Based on 2023-24 water quality reports, Taylors Lakes achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 18 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.5, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.79 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.69 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 1.6 NTU, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Watergardens , Sydenham , Keilor Lodge
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Taylors Lakes
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Taylors Lakes — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Taylors Lakes's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Taylors Lakes — removes chlorine taste and odour.
Comparison
How Taylors Lakes compares
Compared to Victoria and national averages
| Metric | Taylors Lakes | VIC Avg | National Avg |
|---|---|---|---|
| Hardness | 18 mg/L | 28 mg/L | 85.3 mg/L |
| pH | 7.5 | 7.4 | 7.8 |
| Fluoride | 0.79 mg/L | 0.7 mg/L | 0.7 mg/L |
| Chlorine | 0.69 mg/L | — | — |
| Turbidity | 1.6 NTU | 1.8 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 14 | mg/L CaCO3 | No limit | Measured |
| Aluminium | 0.03 | mg/L | < 0.2 | Good |
| Free Chlorine | 0.69 | mg/L | < 5 | Good |
| Total Chlorine | 0.85 | mg/L | < 5 | Good |
| Colour | 3 | HU | < 15 | Good |
| E. coli | 0 | MPN/100mL | < 0 | Compliant |
| Electrical Conductivity | 78 | No limit | Measured | |
| Fluoride | 0.79 | mg/L | < 1.5 | Good |
| Hardness | 18 | mg/L CaCO3 | < 200 | Good |
| Iron | 0.15 | mg/L | < 0.3 | Good |
| Manganese | 0.011 | mg/L | < 0.1 | Good |
| pH | 7.5 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 6.4 | mg/L | < 180 | Good |
| Trihalomethanes | 0.041 | mg/L | < 0.25 | Good |
| Turbidity | 1.6 | NTU | < 5 | Good |
Safety
Safety assessment
Based on 15 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (18 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.5 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.79 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.69 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Taylors Lakes measures 0.69 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Taylors Lakes's water is soft at 18 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.79 mg/L in Taylors Lakes. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Sediment Filtration
Turbidity is 1.6 NTU in Taylors Lakes. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.
Get water quality alerts
We'll email you when Taylors Lakes's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Taylors Lakes?
How hard is the water in Taylors Lakes?
What water utility supplies Taylors Lakes?
Does Taylors Lakes water have fluoride?
What is the water quality score for Taylors Lakes?
What is the population of Taylors Lakes?
Supplier
Water utility
- Utility
- Greater Western Water
- Supply Zone
- Taylors Lakes
- Data Source
- Greater Western Water — GWW Annual Water Quality Report 2023 24
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.4 and 10.0
Utility reports average the grid — not your home
Taylors Lakes's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Melbourne
In-depth articles on the water supply that serves Taylors Lakes
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Taylors Lakes, VIC [Data set]. Compiled from Greater Western Water data (2023-24 annual report). https://waterscore.com.au/water-quality/taylors-lakes-vic/
Embed
Add Taylors Lakes, VIC water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Taylors Lakes, VIC
Is tap water safe?
Safety assessment
Water hardness
18 mg/L
Best water filter
Filter recommendations
Victoria water quality
State coverage
Greater Western Water
Water utility
Compare with Watergardens
Taylors Lakes vs Watergardens
Compare with Sydenham
Taylors Lakes vs Sydenham
Compare with Keilor Lodge
Taylors Lakes vs Keilor Lodge
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Greater Western Water (2023-24 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.