As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in The Lakes, WA

Postcode 6556 · Supplied by Water Corporation via Mundaring

Current data · 2024-25 annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About The Lakes

The Lakes is a suburb of 20 residents in Western Australia (postcode 6556). The median age is 56. It falls within the Water Corporation area. Neighbouring suburbs include Beechina, Chidlow, Gorrie, Malmalling.

Most residents own outright (88%), while 0% own their home with a mortgage, while 0% rent. The median household income is $188,500 per year.

Tap water in The Lakes is supplied by Water Corporation. The suburb receives water via the Mundaring supply zone.

Water quality summary

Based on 2024-25 water quality reports, The Lakes achieves a WaterScore of 8.5 out of 10, rated excellent overall. Water hardness measures 98 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 8.55, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.83 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Total dissolved solids (TDS) measure 470 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU.

Compare with nearby suburbs: Beechina , Chidlow , Gorrie

Suburb snapshot

Population

20

Median Age

56 years

Median Income

$3,625 /week

Owner-occupied

88%

Recommended filters for The Lakes

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra Pro)

4.8 · 125 ratings on Amazon

Budget-friendly Matched to The Lakes's water

A reliable marella 2.4l fridge water filter jug (maxtra pro) suitable for The Lakes's water profile.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to The Lakes's water

A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for The Lakes's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to The Lakes's water

A reliable 8.5l stainless steel gravity system suitable for The Lakes's water profile.

How The Lakes compares

Compared to Western Australia and national averages

Metric The Lakes WA Avg National Avg
Hardness 98 mg/L 99.8 mg/L 80.3 mg/L
pH 8.55 7.9 7.8
Fluoride 0.83 mg/L 0.7 mg/L 0.7 mg/L
Turbidity 0.1 NTU 0.2 NTU 0.4 NTU
TDS 470 mg/L 434.2 mg/L 267.4 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 67 mg/L CaCO3 No limit Measured
Aluminium 0.019 mg/L < 0.2 Good
Chloride 200 mg/L < 250 Good
Hardness 98 mg/L CaCO3 < 200 Good
Iron 0.006 mg/L < 0.3 Good
Manganese 0.002 mg/L < 0.1 Good
pH 8.55 pH units 6.5 – 8.5 Outside range
Sodium 113 mg/L < 180 Good
Sulfate 30 mg/L < 500 Good
Total Dissolved Solids 470 mg/L < 600 Good
Colour 1 HU < 15 Good
Turbidity 0.1 NTU < 5 Good
Fluoride 0.83 mg/L < 1.5 Good
Nitrate 0.4 mg/L < 50 Good
Trihalomethanes 0.021 mg/L < 0.25 Good

Safety assessment

Of 15 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.55 pH units.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (98 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 8.55 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.83 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Data unavailable

Disinfection

Chlorine data is not currently available for The Lakes.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Soft Water Advantage

The Lakes's water is moderately hard at 98 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.83 mg/L in The Lakes. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 470 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Alkaline Water

pH measures 8.55 in The Lakes, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.

Get water quality alerts

We'll email you when The Lakes's water data is updated.

Frequently asked questions

Is tap water safe to drink in The Lakes?
Yes, tap water in The Lakes is generally safe to drink. It scores 8.5 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Water Corporation. Of 15 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.55 pH units.
How hard is the water in The Lakes?
Water hardness in The Lakes is 98 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies The Lakes?
The Lakes is supplied by Water Corporation.
Does The Lakes water have fluoride?
Yes, water in The Lakes is fluoridated, with a fluoride level of 0.83 mg/L. This is within the recommended range for dental health.
What is the water quality score for The Lakes?
The Lakes has a WaterScore of 8.5 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of The Lakes?
The population of The Lakes, WA is 20 according to the 2021 Australian Census. The median age of residents is 56 years.

Water utility

Supply Zone
Mundaring
Data Source
Water Corporation — WC Perth Aesthetic Tables 2024 25, WC Perth Health Tables 2024 25

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.5 and 9.5

Utility reports average the grid — not your home

The Lakes's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Perth and WA

In-depth articles on the water supply that serves The Lakes

Cite this page

Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.

WaterScore. (2026). Tap water quality in The Lakes, WA [Data set]. Compiled from Water Corporation data (2024-25 annual report). https://waterscore.com.au/water-quality/the-lakes-wa/

Add The Lakes, WA water data to your website

For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.

Explore more

Related pages for The Lakes, WA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Water Corporation (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap