Tap Water Quality in Twin Waters, QLD
Postcode 4564 · Supplied by Seqwater via Sunshine Coast
Quality Score
About Twin Waters
Twin Waters is a suburb of 2,966 residents in Queensland (postcode 4564). The median age is 60. It falls within the Seqwater area. Neighbouring suburbs include Pacific Paradise, Mudjimba, Cotton Tree, Kuluin.
Most residents own outright (52%), while 27% own their home with a mortgage, while 11% rent. The median household income is $87,828 per year. The top countries of birth for residents are United Kingdom (39%), New Zealand (18%), and South Africa (9%).
Tap water in Twin Waters is supplied by Seqwater. The suburb receives water via the Sunshine Coast supply zone.
Water quality summary
Based on recent water quality reports, Twin Waters achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 52.3 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The water is fluoridated at 0.83 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.6 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.4 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Pacific Paradise , Mudjimba , Cotton Tree
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Twin Waters
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Twin Waters — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Twin Waters's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Twin Waters — removes chlorine taste and odour.
Comparison
How Twin Waters compares
Compared to Queensland and national averages
| Metric | Twin Waters | QLD Avg | National Avg |
|---|---|---|---|
| Hardness | 52.3 mg/L | 76.3 mg/L | 85.3 mg/L |
| pH | — | 6.2 | 7.8 |
| Fluoride | 0.83 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 1.6 mg/L | — | — |
| Turbidity | 0.4 NTU | 0.3 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.83 | mg/L | < 1.5 | Good |
| Free Chlorine | 1.6 | mg/L | < 5 | Good |
| Monochloramine | 3.5 | mg/L | < 3 | Exceeds |
| Total Chlorine | 2.1 | mg/L | < 5 | Good |
| Bromate | 0.005 | mg/L | No limit | Measured |
| Chlorate | 0.085 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Nitrate | 0.052 | mg/L | < 50 | Good |
| Nitrite | 0.004 | mg/L | No limit | Measured |
| Trihalomethanes | 0.0343 | mg/L | < 0.25 | Good |
| Chloride | 26.6 | mg/L | < 250 | Good |
| Hardness | 52.3 | mg/L | < 200 | Good |
| Sodium | 16.3 | mg/L | < 180 | Good |
| Aluminium | 0.008 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.4 | NTU | < 5 | Good |
| Calcium | 12.6 | mg/L | No limit | Measured |
| Magnesium | 5.25 | mg/L | No limit | Measured |
| Alkalinity | 49 | mg/L | No limit | Measured |
| Conductivity | 235.6 | µS/cm | No limit | Measured |
| Temperature | 26.7 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Safety
Safety assessment
Of 32 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: Monochloramine at 3.5 mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (52.3 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Data unavailable
pH Level
pH data is not currently available for Twin Waters.
Fluoridated
Fluoride
Fluoride at 0.83 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.6 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Twin Waters's chlorine level is 1.6 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Twin Waters's water is soft at 52.3 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.83 mg/L in Twin Waters. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Twin Waters's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Twin Waters?
How hard is the water in Twin Waters?
What water utility supplies Twin Waters?
Does Twin Waters water have fluoride?
What is the water quality score for Twin Waters?
What is the population of Twin Waters?
Supplier
Water utility
- Utility
- Seqwater
- Supply Zone
- Sunshine Coast
- Data Source
- Seqwater — Sunshine Coast
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Twin Waters's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for the Sunshine Coast and Noosa
In-depth articles on the water supply that serves Twin Waters
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Twin Waters, QLD [Data set]. Compiled from Seqwater data (annual report). https://waterscore.com.au/water-quality/twin-waters-qld/
Embed
Add Twin Waters, QLD water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Twin Waters, QLD
Is tap water safe?
Safety assessment
Water hardness
52.3 mg/L
Best water filter
Filter recommendations
Queensland water quality
State coverage
Seqwater
Water utility
Compare with Pacific Paradise
Twin Waters vs Pacific Paradise
Compare with Mudjimba
Twin Waters vs Mudjimba
Compare with Cotton Tree
Twin Waters vs Cotton Tree
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Seqwater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.