Tap Water Quality in Yarrambat, VIC
Postcode 3091 · Supplied by Yarra Valley Water via Diamond Creek
Quality Score
About Yarrambat
Yarrambat is a suburb of 1,602 residents in Victoria (postcode 3091). The median age is 47. It falls within the Melbourne North-East area. Neighbouring suburbs include Diamond Creek, Plenty, Doreen, St Helena.
Most residents own outright (48%), while 44% own their home with a mortgage, while 4% rent. The median household income is $135,200 per year. The top countries of birth for residents are Italy (21%), United Kingdom (18%), and New Zealand (9%).
Tap water in Yarrambat is supplied by Yarra Valley Water. Yarra Valley Water serves Melbourne North-East. The suburb receives water via the Diamond Creek, Yarrambat supply zones.
Water quality summary
Based on 2023-24 water quality reports, Yarrambat achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 91 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 7.5, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.79 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.35 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 2.8 NTU, within the ADWG guideline of 5 NTU.
Compare with nearby suburbs: Diamond Creek , Plenty , Doreen
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Yarrambat
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Yarrambat's water profile.
Waterdrop
TSA Under-Sink Filter (Fluoride + PFAS)
4.4 · 2,237 ratings on Amazon
A reliable tsa under-sink filter (fluoride + pfas) suitable for Yarrambat's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Yarrambat's water profile.
Comparison
How Yarrambat compares
Compared to Victoria and national averages
| Metric | Yarrambat | VIC Avg | National Avg |
|---|---|---|---|
| Hardness | 91 mg/L | 28 mg/L | 85.1 mg/L |
| pH | 7.5 | 7.4 | 8.4 |
| Fluoride | 0.79 mg/L | 0.7 mg/L | 0.7 mg/L |
| Chlorine | 0.35 mg/L | — | — |
| Turbidity | 2.8 NTU | 1.8 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Trihalomethanes | 0.05 | mg/L | < 0.25 | Good |
| Turbidity | 2.8 | NTU | < 5 | Good |
| Copper | 0.003 | mg/L | < 2 | Good |
| Free Chlorine | 0.35 | mg/L | < 5 | Good |
| Fluoride | 0.79 | mg/L | < 1.5 | Good |
| Lead | 0.0004 | mg/L | < 0.01 | Good |
| Aluminium | 0.017 | mg/L | < 0.2 | Good |
| pH | 7.5 | pH units | 6.5 – 8.5 | Normal |
| Iron | 0.025 | mg/L | < 0.3 | Good |
| Zinc | 0.009 | mg/L | No limit | Measured |
| Hardness | 91 | mg/L CaCO3 | < 200 | Good |
Safety
Safety assessment
Based on 11 parameters tested, all results fall within Australian Drinking Water Guidelines.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Moderately hard (91 mg/L)
Water Hardness
Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
Normal Range
pH Level
pH of 7.5 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.79 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.35 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Yarrambat measures 0.35 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Yarrambat's water is moderately hard at 91 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.79 mg/L in Yarrambat. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Sediment Filtration
Turbidity is 2.8 NTU in Yarrambat. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.
Get water quality alerts
We'll email you when Yarrambat's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Yarrambat?
How hard is the water in Yarrambat?
What water utility supplies Yarrambat?
Does Yarrambat water have fluoride?
What is the water quality score for Yarrambat?
What is the population of Yarrambat?
Supplier
Water utility
- Utility
- Yarra Valley Water
- Service Area
- Melbourne North-East
- Supply Zone
- Diamond Creek
- Website
- www.yvw.com.au
- Data Source
- Yarra Valley Water — YVW Annual Water Quality Report 2023 24
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.4 and 10.0
Utility reports average the grid — not your home
Yarrambat's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Melbourne
In-depth articles on the water supply that serves Yarrambat
Related
Explore more
Related pages for Yarrambat, VIC
Is tap water safe?
Safety assessment
Water hardness
91 mg/L
Best water filter
Filter recommendations
Victoria water quality
State coverage
Yarra Valley Water
Water utility
Compare with Diamond Creek
Yarrambat vs Diamond Creek
Compare with Plenty
Yarrambat vs Plenty
Compare with Doreen
Yarrambat vs Doreen
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Yarra Valley Water (2023-24 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.