Is Tap Water Safe to Drink in Ormeau Hills, QLD?
Postcode 4208 · Supplied by Seqwater · Current data · annual report
Yes, safe to drink
Tap water in Ormeau Hills meets Australian Drinking Water Guidelines across all tested parameters. The water is safe to drink straight from the tap.
Compare with nearby suburbs: Burnside , Gilberton , Halfway Creek
ADWG compliance check
Each parameter tested against Australian Drinking Water Guidelines
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.81 | mg/L | < 1.5 | Good |
| Free Chlorine | 1.7 | mg/L | < 5 | Good |
| Total Chlorine | 1.6 | mg/L | < 5 | Good |
| Bromate | 0.005 | mg/L | No limit | Measured |
| Chlorate | 0.066 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Trihalomethanes | 39.6 | µg/L | < 0.25 | Exceeds |
| Chloride | 25.7 | mg/L | < 250 | Good |
| Hardness | 33.9 | mg/L | < 200 | Good |
| Sodium | 18.3 | mg/L | < 180 | Good |
| pH | 6.2 | mg/L | 6.5 – 8.5 | Outside range |
| Aluminium | 0.013 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1.3 | HU | < 15 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
| Calcium | 12.5 | mg/L | No limit | Measured |
| Magnesium | 0.7 | mg/L | No limit | Measured |
| Alkalinity | 29.5 | mg/L | No limit | Measured |
| Conductivity | 197.5 | µS/cm | No limit | Measured |
| Temperature | 25 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Contaminant check
Parameters that exceed or approach ADWG limits
Trihalomethanes — 39.6 µg/L
Exceeds ADWG guideline of < 0.25 µg/L.
pH — 6.2 mg/L
Exceeds ADWG guideline of 6.5 – 8.5 mg/L.
What's in your water
Key parameters explained in plain English
Water Hardness
At 33.9 mg/L, Ormeau Hills's water is classified as soft. Soft water is gentle on appliances and skin. The ADWG aesthetic guideline is 200 mg/L.
pH Level
pH of 6.2 is outside the recommended range of 6.5–8.5. Water outside this range may taste metallic or cause pipe corrosion.
Fluoride
Fluoride measured at 0.81 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine (Disinfection)
Chlorine at 1.7 mg/L (ADWG limit: 5 mg/L). Used to kill harmful bacteria and ensure water stays safe in the pipes. May affect taste — a carbon filter or refrigerating water can reduce chlorine.
E. coli
No E. coli detected — the water meets the ADWG standard of zero E. coli per 100 mL. This indicates effective disinfection.
About your water supply
- Water Utility
- Seqwater
- Supply Zone
- Gold Coast
Frequently asked questions
Is Ormeau Hills tap water safe?
What contaminants are in Ormeau Hills water?
Should I filter my tap water in Ormeau Hills?
Guides for the Gold Coast
In-depth articles on the water supply that serves Ormeau Hills
Is tap water safe to drink in the Gold Coast?
What the utility data says about the Gold Coast's supply
Water hardness in the Gold Coast
Soft at 35 to 45 mg/L, and which northern suburbs are the exception
Best water filters for Australian tap water
Ranked picks by water problem, from jugs to under-sink RO
Learn more about water in Ormeau Hills
Is tap water safe in nearby suburbs?
Safety assessments for suburbs on the same water supply
Utility reports average the grid — not your home
Ormeau Hills's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Recommended water filters for Ormeau Hills
Based on Ormeau Hills's water profile — matched to the parameters tested above
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Ormeau Hills — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Ormeau Hills's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Ormeau Hills — removes chlorine taste and odour.
Important disclaimer: The safety assessment on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or a guarantee of water safety. Our assessment is based on comparison against Australian Drinking Water Guidelines (ADWG) using data from Seqwater (annual report). This data reflects conditions at the time of utility testing and may not reflect real-time water quality at your specific tap. Water quality can be affected by local plumbing, building age, seasonal variations, and other factors not captured in utility reports. If you have health concerns about your drinking water, please consult a qualified health professional or contact your local water utility directly. See our Terms of Use.