As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Adelaide River, NT

Postcode 0846 · Supplied by Power and Water Corporation via Adelaide River

Current data · 2024 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Adelaide River

Adelaide River is a suburb of 317 residents in Northern Territory (postcode 0846). The median age is 52. It falls within the Power and Water Corporation area. Neighbouring suburbs include Batchelor, Darwin River, Berry Springs, Manton.

Most residents own outright (45%), while 26% rent, while 16% own their home with a mortgage. The median household income is $51,584 per year. The top countries of birth for residents are United Kingdom (40%), New Zealand (24%), and Philippines (11%).

Tap water in Adelaide River is supplied by Power and Water Corporation. The suburb receives water via the Adelaide River supply zone.

Water quality summary

Based on 2024 water quality reports, Adelaide River achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 112 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 7.6, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.36 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 48 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 1.5 NTU, within the ADWG guideline of 5 NTU.

Compare with nearby suburbs: Batchelor , Darwin River , Berry Springs

Suburb snapshot

Population

317

Median Age

52 years

Median Income

$992 /week

Owner-occupied

61%

Recommended filters for Adelaide River

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Adelaide River's water

Ideal for Adelaide River — removes chlorine taste and odour.

ZeroWater 23 Cup Dispenser with TDS Meter

ZeroWater

23-Cup Dispenser (incl. TDS Meter)

4.3 · 27,123 ratings on Amazon

Budget-friendly Matched to Adelaide River's water

A reliable 23-cup dispenser (incl. tds meter) suitable for Adelaide River's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Adelaide River's water

Ideal for Adelaide River — removes chlorine taste and odour.

How Adelaide River compares

Compared to Northern Territory and national averages

Metric Adelaide River NT Avg National Avg
Hardness 112 mg/L 103.9 mg/L 85.1 mg/L
pH 7.6 7.3 8.4
Fluoride 0.36 mg/L 0.6 mg/L 0.7 mg/L
Chlorine 1 mg/L
Turbidity 1.5 NTU 1.2 NTU 0.4 NTU
TDS 48 mg/L 35.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Total Chlorine 1 mg/L < 5 Good
Copper 0.1 mg/L < 2 Good
Fluoride 0.36 mg/L < 1.5 Good
Aluminium 0.02 mg/L < 0.2 Good
Chloride 22 mg/L < 250 Good
Free Chlorine 1 mg/L < 5 Good
Colour 2 HU < 15 Good
Hardness 112 mg/L CaCO3 < 200 Good
Iron 0.01 mg/L < 0.3 Good
Manganese 0.012 mg/L < 0.1 Good
pH 7.6 pH units 6.5 – 8.5 Normal
Sulfate 0.003 mg/L < 500 Good
Total Dissolved Solids 48 mg/L < 600 Good
Turbidity 1.5 NTU < 5 Good
Zinc 0.011 mg/L No limit Measured
Alkalinity 130 mg/L CaCO3 No limit Measured
Calcium 0.0064 mg/L No limit Measured
Conductivity 8.1 µS/cm No limit Measured
Magnesium 22 mg/L No limit Measured

Safety assessment

Based on 19 parameters tested, all results fall within Australian Drinking Water Guidelines.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (112 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Normal Range

pH Level

pH of 7.6 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.36 mg/L. Below the recommended range.

Chlorine

Disinfection

Chlorine measured at 1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Adelaide River measures 1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Adelaide River's water is moderately hard at 112 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.36 mg/L in Adelaide River. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Sediment Filtration

Turbidity is 1.5 NTU in Adelaide River. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.

Get water quality alerts

We'll email you when Adelaide River's water data is updated.

Frequently asked questions

Is tap water safe to drink in Adelaide River?
Yes, tap water in Adelaide River is generally safe to drink. It scores 9.5 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Power and Water Corporation. Based on 19 parameters tested, all results fall within Australian Drinking Water Guidelines.
How hard is the water in Adelaide River?
Water hardness in Adelaide River is 112 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Adelaide River?
Adelaide River is supplied by Power and Water Corporation.
Does Adelaide River water have fluoride?
Yes, water in Adelaide River is fluoridated, with a fluoride level of 0.36 mg/L. This is below the recommended range of 0.6–1.1 mg/L.
What is the water quality score for Adelaide River?
Adelaide River has a WaterScore of 9.5 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Adelaide River?
The population of Adelaide River, NT is 317 according to the 2021 Australian Census. The median age of residents is 52 years.

Water utility

Supply Zone
Adelaide River
Data Source
Power and Water Corporation — 2017 Power and Water Corporation Drinking Water Quality Report, Drinking Water Quality Report 2019 WEB, 2024 Power and Water Drinking Water Quality Report

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.5 and 10.0

Utility reports average the grid — not your home

Adelaide River's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Darwin and the NT

In-depth articles on the water supply that serves Adelaide River

Explore more

Related pages for Adelaide River, NT

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Power and Water Corporation (2024 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 1 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →