Tap Water Quality in Arthurs Creek, VIC
Postcode 3099 · Supplied by Yarra Valley Water via Hurstbridge
Quality Score
About Arthurs Creek
Arthurs Creek is a suburb of 478 residents in Victoria (postcode 3099). The median age is 52. It falls within the Melbourne North-East area. Neighbouring suburbs include Nutfield, Hurstbridge, Doreen, Yan Yean.
Most residents own outright (51%), while 34% own their home with a mortgage, while 4% rent. The median household income is $115,128 per year. The top countries of birth for residents are United Kingdom (35%), New Zealand (17%), and China (8%).
Tap water in Arthurs Creek is supplied by Yarra Valley Water. Yarra Valley Water serves Melbourne North-East. The suburb receives water via the Hurstbridge, Yarrambat supply zones.
Water quality summary
Based on 2023-24 water quality reports, Arthurs Creek achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 91 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 7.5, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.79 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.35 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 2.8 NTU, within the ADWG guideline of 5 NTU.
Compare with nearby suburbs: Nutfield , Hurstbridge , Doreen
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Arthurs Creek
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Arthurs Creek's water profile.
ZeroWater
2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Arthurs Creek's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Arthurs Creek's water profile.
Comparison
How Arthurs Creek compares
Compared to Victoria and national averages
| Metric | Arthurs Creek | VIC Avg | National Avg |
|---|---|---|---|
| Hardness | 91 mg/L | 28 mg/L | 85.1 mg/L |
| pH | 7.5 | 7.4 | 8.4 |
| Fluoride | 0.79 mg/L | 0.7 mg/L | 0.7 mg/L |
| Chlorine | 0.35 mg/L | — | — |
| Turbidity | 2.8 NTU | 1.8 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Trihalomethanes | 0.05 | mg/L | < 0.25 | Good |
| Turbidity | 2.8 | NTU | < 5 | Good |
| Copper | 0.003 | mg/L | < 2 | Good |
| Free Chlorine | 0.35 | mg/L | < 5 | Good |
| Fluoride | 0.79 | mg/L | < 1.5 | Good |
| Lead | 0.0004 | mg/L | < 0.01 | Good |
| Aluminium | 0.017 | mg/L | < 0.2 | Good |
| pH | 7.5 | pH units | 6.5 – 8.5 | Normal |
| Iron | 0.025 | mg/L | < 0.3 | Good |
| Zinc | 0.009 | mg/L | No limit | Measured |
| Hardness | 91 | mg/L CaCO3 | < 200 | Good |
Safety
Safety assessment
Based on 11 parameters tested, all results fall within Australian Drinking Water Guidelines.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Moderately hard (91 mg/L)
Water Hardness
Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
Normal Range
pH Level
pH of 7.5 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.79 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.35 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Arthurs Creek measures 0.35 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Arthurs Creek's water is moderately hard at 91 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.79 mg/L in Arthurs Creek. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Sediment Filtration
Turbidity is 2.8 NTU in Arthurs Creek. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.
Get water quality alerts
We'll email you when Arthurs Creek's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Arthurs Creek?
How hard is the water in Arthurs Creek?
What water utility supplies Arthurs Creek?
Does Arthurs Creek water have fluoride?
What is the water quality score for Arthurs Creek?
What is the population of Arthurs Creek?
Supplier
Water utility
- Utility
- Yarra Valley Water
- Service Area
- Melbourne North-East
- Supply Zone
- Hurstbridge
- Website
- www.yvw.com.au
- Data Source
- Yarra Valley Water — YVW Annual Water Quality Report 2023 24
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.4 and 10.0
Utility reports average the grid — not your home
Arthurs Creek's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Melbourne
In-depth articles on the water supply that serves Arthurs Creek
Related
Explore more
Related pages for Arthurs Creek, VIC
Is tap water safe?
Safety assessment
Water hardness
91 mg/L
Best water filter
Filter recommendations
Victoria water quality
State coverage
Yarra Valley Water
Water utility
Compare with Nutfield
Arthurs Creek vs Nutfield
Compare with Hurstbridge
Arthurs Creek vs Hurstbridge
Compare with Doreen
Arthurs Creek vs Doreen
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Yarra Valley Water (2023-24 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.