As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Bermagui South, NSW

Postcode 2546 · Supplied by Sydney Water via Warragamba

Current data · 2024-25 annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Bermagui South

Bermagui South is a suburb in New South Wales, Australia (postcode 2546). It falls within the Sydney Water area. Neighbouring suburbs include Akolele, Barragga Bay, Beauty Point, Bermagui.

Tap water in Bermagui South is supplied by Sydney Water. The suburb receives water via the Warragamba supply zone.

Water quality summary

Based on 2024-25 water quality reports, Bermagui South achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 44.4 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.7, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.03 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.28 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 135.8 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Akolele , Barragga Bay , Beauty Point

Recommended filters for Bermagui South

Products matched to your water profile

Our top pick
ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Bermagui South's water

Ideal for Bermagui South — removes fluoride (currently 1.03 mg/L).

Geekpure 5-Stage Under-Sink RO Drinking Water Filter System

Geekpure

5-Stage Under-Sink RO (75 GPD)

4.4 · 400 ratings on Amazon

Mid-range Matched to Bermagui South's water

Ideal for Bermagui South — removes fluoride (currently 1.03 mg/L), removes chlorine taste and odour.

Nakii Water Filter Pitcher with WQA certification

Nakii

Water Filter Pitcher (WQA Certified, 150 Gallons)

4.4 · 6,827 ratings on Amazon

Budget-friendly Matched to Bermagui South's water

Ideal for Bermagui South — removes chlorine taste and odour.

How Bermagui South compares

Compared to New South Wales and national averages

Metric Bermagui South NSW Avg National Avg
Hardness 44.4 mg/L 45.9 mg/L 85.1 mg/L
pH 7.7 7.7 8.4
Fluoride 1.03 mg/L 1 mg/L 0.7 mg/L
Chlorine 1.28 mg/L — —
Turbidity 0.1 NTU 0.2 NTU 0.4 NTU
TDS 135.8 mg/L 116.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Iron 0.009 mg/L < 0.3 Good
Aluminium 0.005 mg/L < 0.2 Good
Manganese 0.0005 mg/L < 0.1 Good
Copper 0.031 mg/L < 2 Good
Zinc 0.004 mg/L No limit Measured
Ammonia 0.001 mg/L No limit Measured
Turbidity 0.1 NTU < 5 Good
Colour 2 HU < 15 Good
Dissolved Oxygen 102.7 % saturation No limit Measured
Total Dissolved Solids 135.8 mg/L < 600 Good
Sulfate 9.8 mg/L < 500 Good
Hardness 44.4 mg/L < 200 Good
pH 7.7 pH units 6.5 – 8.5 Normal
Temperature 19.1 degrees C No limit Measured
E. coli 0 orgs/100 mL < 0 Compliant
Free Chlorine 1.28 mg/L < 5 Good
Monochloramine 0.16 mg/L < 3 Good
Fluoride 1.03 mg/L < 1.5 Good
Trihalomethanes 0.12 mg/L < 0.25 Good
Ndma 0.0001 mg/L No limit Measured
Chloride 0.004 mg/L < 250 Good
Pfos Pfhxs 0.0018 µg/L No limit Measured
PFOA 0.0005 µg/L < 0.56 Good

Safety assessment

Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (44.4 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.7 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 1.03 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 1.28 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Bermagui South's chlorine level is 1.28 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Soft Water Advantage

Bermagui South's water is soft at 44.4 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 1.03 mg/L in Bermagui South. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Get water quality alerts

We'll email you when Bermagui South's water data is updated.

Frequently asked questions

Is tap water safe to drink in Bermagui South?
Yes, tap water in Bermagui South is generally safe to drink. It scores 9.6 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Sydney Water. Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Bermagui South?
Water hardness in Bermagui South is 44.4 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Bermagui South?
Bermagui South is supplied by Sydney Water.
Does Bermagui South water have fluoride?
Yes, water in Bermagui South is fluoridated, with a fluoride level of 1.03 mg/L. This is within the recommended range for dental health.
What is the water quality score for Bermagui South?
Bermagui South has a WaterScore of 9.6 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.

Water utility

Utility
Sydney Water
Supply Zone
Warragamba
Data Source
Sydney Water — quarterly warragamba q2 202425, quarterly warragamba q3 202425, quarterly warragamba q4 202425

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.6 and 10.0

Utility reports average the grid — not your home

Bermagui South's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Sydney

In-depth articles on the water supply that serves Bermagui South

Explore more

Related pages for Bermagui South, NSW

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Fluoride · 1.03 mg/L — carbon won't help

iSpring · ★ 4.6 on Amazon

Remove fluoride →