As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Black Hill, SA

Postcode 5353 · Supplied by SA Water via Swan Reach

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Black Hill

Black Hill is a suburb of 45 residents in South Australia (postcode 5353). The median age is 55. It falls within the SA Water area. Neighbouring suburbs include Kongolia, Mount Mckenzie, Sedan, Cambrai.

Most residents own outright (68%), while 16% rent, while 12% own their home with a mortgage. The median household income is $34,788 per year. The top countries of birth for residents are United Kingdom (64%) and Netherlands (36%).

Tap water in Black Hill is supplied by SA Water. The suburb receives water via the Swan Reach supply zone.

Water quality summary

Based on 2025 water quality reports, Black Hill achieves a WaterScore of 8.9 out of 10, rated excellent overall. Water hardness measures 82 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 8.8, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.7 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.1 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 275 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Kongolia , Mount Mckenzie , Sedan

Suburb snapshot

Population

45

Median Age

55 years

Median Income

$669 /week

Owner-occupied

80%

Recommended filters for Black Hill

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Black Hill's water

A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Black Hill's water profile.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Black Hill's water

A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Black Hill's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Black Hill's water

A reliable 8.5l stainless steel gravity system suitable for Black Hill's water profile.

How Black Hill compares

Compared to South Australia and national averages

Metric Black Hill SA Avg National Avg
Hardness 82 mg/L 119.3 mg/L 85.1 mg/L
pH 8.8 3.2 8.4
Fluoride 0.7 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.1 mg/L
Turbidity 0.1 NTU 0.1 NTU 0.4 NTU
TDS 275 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 67 mg/L No limit Measured
Aluminium 0.029 mg/L < 0.2 Good
Calcium 16 mg/L No limit Measured
Chloride 70 mg/L < 250 Good
Free Chlorine 0.1 mg/L < 5 Good
Total Chlorine 3.7 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0048 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.7 mg/L < 1.5 Good
Hardness 82 PPM or mg/L < 200 Good
Iron 0.0014 mg/L < 0.3 Good
Lead 0.0002 mg/L < 0.01 Good
Magnesium 10.21 mg/L No limit Measured
Manganese 0.0032 mg/L < 0.1 Good
Nitrate 0.7 mg/L < 50 Good
pH 8.8 pH units 6.5 – 8.5 Outside range
Sodium 59.5 mg/L < 180 Good
Sulfate 49.5 mg/L < 500 Good
Total Dissolved Solids 275 mg/L < 600 Good
Turbidity 0.1 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.8 pH units. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (82 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 8.8 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.7 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Black Hill measures 0.1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Black Hill's water is moderately hard at 82 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.7 mg/L in Black Hill. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Alkaline Water

pH measures 8.8 in Black Hill, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.

Get water quality alerts

We'll email you when Black Hill's water data is updated.

Frequently asked questions

Is tap water safe to drink in Black Hill?
Yes, tap water in Black Hill is generally safe to drink. It scores 8.9 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.8 pH units. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Black Hill?
Water hardness in Black Hill is 82 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Black Hill?
Black Hill is supplied by SA Water.
Does Black Hill water have fluoride?
Yes, water in Black Hill is fluoridated, with a fluoride level of 0.7 mg/L. This is within the recommended range for dental health.
What is the water quality score for Black Hill?
Black Hill has a WaterScore of 8.9 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Black Hill?
The population of Black Hill, SA is 45 according to the 2021 Australian Census. The median age of residents is 55 years.

Water utility

Utility
SA Water
Supply Zone
Swan Reach
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.9 and 9.9

Utility reports average the grid — not your home

Black Hill's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Black Hill

Explore more

Related pages for Black Hill, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap