As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Branxholm, TAS

Postcode 7261 · Supplied by TasWater via Ringarooma

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Branxholm

Branxholm is a suburb of 236 residents in Tasmania (postcode 7261). The median age is 53. It falls within the TasWater area. Neighbouring suburbs include Warrentinna, Scottsdale, Blumont, Cuckoo.

Most residents own outright (49%), while 31% own their home with a mortgage, while 19% rent. The median household income is $43,836 per year. The top countries of birth for residents are United Kingdom (42%), Vietnam (13%), and New Zealand (13%).

Tap water in Branxholm is supplied by TasWater. The suburb receives water via the Ringarooma supply zone.

Water quality summary

Based on recent water quality reports, Branxholm achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 13.166667 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.369858, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.806667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.88446 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 44.416667 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.194602 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Warrentinna , Scottsdale , Blumont

Suburb snapshot

Population

236

Median Age

53 years

Median Income

$843 /week

Owner-occupied

80%

Recommended filters for Branxholm

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Branxholm's water

Ideal for Branxholm — removes chlorine taste and odour.

ZeroWater 23 Cup Dispenser with TDS Meter

ZeroWater

23-Cup Dispenser (incl. TDS Meter)

4.3 · 27,123 ratings on Amazon

Budget-friendly Matched to Branxholm's water

A reliable 23-cup dispenser (incl. tds meter) suitable for Branxholm's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Branxholm's water

Ideal for Branxholm — removes chlorine taste and odour.

How Branxholm compares

Compared to Tasmania and national averages

Metric Branxholm TAS Avg National Avg
Hardness 13.166667 mg/L 34.8 mg/L 85.1 mg/L
pH 7.369858 7.4 8.4
Fluoride 0.806667 mg/L 0.9 mg/L 0.7 mg/L
Chlorine 0.88446 mg/L
Turbidity 0.194602 NTU 0.3 NTU 0.4 NTU
TDS 44.416667 mg/L 93.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 11.916667 mg/L No limit Measured
Aluminium 0.021667 mg/L < 0.2 Good
Ammonia 0.002833 mg/L No limit Measured
Antimony 0.001 mg/L No limit Measured
Arsenic 0.001 mg/L No limit Measured
Cadmium 0.0002 mg/L No limit Measured
Calcium 4.283333 mg/L No limit Measured
Chloride 10.5 mg/L < 250 Good
Free Chlorine 0.88446 mg/L < 5 Good
Total Chlorine 1.1425 mg/L < 5 Good
Chromium 0.001 mg/L No limit Measured
Colour 2.25 Pt-Co < 15 Good
Conductivity 70.916667 uS/cm No limit Measured
Copper 0.004846 mg/L < 2 Good
Cyanide 0.005 mg/L No limit Measured
E. coli 0 MPN/100ml < 0 Compliant
Fluoride 0.806667 mg/L < 1.5 Good
Hardness 13.166667 mg/L < 200 Good
Iron 0.01 mg/L < 0.3 Good
Lead 0.001 mg/L < 0.01 Good
Magnesium 0.491667 mg/L No limit Measured
Manganese 0.001 mg/L < 0.1 Good
Mercury 0.0001 mg/L No limit Measured
Nickel 0.001 mg/L No limit Measured
Nitrate 0.206667 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
pH 7.369858 pH units 6.5 – 8.5 Normal
Sodium 7.066667 mg/L < 180 Good
Sulfate 1 mg/L < 500 Good
Temperature 13.681534 degrees C No limit Measured
Total Coliforms 0 MPN/100ml < 0 Compliant
Total Dissolved Solids 44.416667 mg/L < 600 Good
Trihalomethanes 0.05375 mg/L < 0.25 Good
Turbidity 0.194602 NTU < 5 Good
Zinc 0.010192 mg/L No limit Measured

Safety assessment

Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (13.166667 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.369858 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.806667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.88446 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Branxholm measures 0.88446 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Branxholm's water is soft at 13.166667 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.806667 mg/L in Branxholm. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Get water quality alerts

We'll email you when Branxholm's water data is updated.

Frequently asked questions

Is tap water safe to drink in Branxholm?
Yes, tap water in Branxholm is generally safe to drink. It scores 9.7 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by TasWater. Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Branxholm?
Water hardness in Branxholm is 13.166667 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Branxholm?
Branxholm is supplied by TasWater.
Does Branxholm water have fluoride?
Yes, water in Branxholm is fluoridated, with a fluoride level of 0.806667 mg/L. This is within the recommended range for dental health.
What is the water quality score for Branxholm?
Branxholm has a WaterScore of 9.7 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Branxholm?
The population of Branxholm, TAS is 236 according to the 2021 Australian Census. The median age of residents is 53 years.

Water utility

Utility
TasWater
Supply Zone
Ringarooma
Data Source
TasWater — Ringarooma

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.7 and 10.0

Utility reports average the grid — not your home

Branxholm's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Launceston and northern Tasmania

In-depth articles on the water supply that serves Branxholm

Explore more

Related pages for Branxholm, TAS

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 0.88446 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →