As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Cornwall, TAS

Postcode 7215 · Supplied by TasWater via Cornwall

Current data · annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Cornwall

Cornwall is a suburb of 82 residents in Tasmania (postcode 7215). The median age is 50. It falls within the TasWater area. Neighbouring suburbs include St Marys, Scamander, Fingal, Douglas-Apsley.

Most residents own outright (50%), while 21% own their home with a mortgage, while 11% rent. The median household income is $32,968 per year.

Tap water in Cornwall is supplied by TasWater. The suburb receives water via the Cornwall, St Marys supply zones.

Water quality summary

Based on recent water quality reports, Cornwall achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 142.857143 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 7.653387, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.943333 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.787581 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 313.333333 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.172419 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: St Marys , Scamander , Fingal

Suburb snapshot

Population

82

Median Age

50 years

Median Income

$634 /week

Owner-occupied

71%

Recommended filters for Cornwall

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Cornwall's water

Ideal for Cornwall — reduces hardness from 142.857143 mg/L, removes chlorine taste and odour.

AO Smith Whole House Salt Free Water Descaler Single-Stage 600,000 Gallon

AO Smith

Salt-Free Whole House Descaler (6yr / 600,000 Gal)

4.3 · 1,517 ratings on Amazon

Premium Matched to Cornwall's water

Ideal for Cornwall — helps reduce limescale buildup from hard water (142.857143 mg/L) without removing hardness minerals.

iSpring Counter-top Drinking Water Filter

iSpring

Counter-top Drinking Water Filter

4.4 · 1,108 ratings on Amazon

Budget-friendly Matched to Cornwall's water

Ideal for Cornwall — removes chlorine taste and odour.

How Cornwall compares

Compared to Tasmania and national averages

Metric Cornwall TAS Avg National Avg
Hardness 142.857143 mg/L 34.8 mg/L 85.1 mg/L
pH 7.653387 7.4 8.4
Fluoride 0.943333 mg/L 0.9 mg/L 0.7 mg/L
Chlorine 0.787581 mg/L
Turbidity 0.172419 NTU 0.3 NTU 0.4 NTU
TDS 313.333333 mg/L 93.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 245 mg/L No limit Measured
Aluminium 0.01 mg/L < 0.2 Good
Ammonia 0.002286 mg/L No limit Measured
Antimony 0.001 mg/L No limit Measured
Arsenic 0.001 mg/L No limit Measured
Cadmium 0.0002 mg/L No limit Measured
Calcium 51.166667 mg/L No limit Measured
Chloride 20 mg/L < 250 Good
Free Chlorine 0.787581 mg/L < 5 Good
Total Chlorine 0.849286 mg/L < 5 Good
Chromium 0.001 mg/L No limit Measured
Colour 2 Pt-Co < 15 Good
Conductivity 525 uS/cm No limit Measured
Copper 0.01125 mg/L < 2 Good
Cyanide 0.005 mg/L No limit Measured
E. coli 0 MPN/100ml < 0 Compliant
Hardness 142.857143 mg/L < 200 Good
Iron 0.01 mg/L < 0.3 Good
Lead 0.001 mg/L < 0.01 Good
Magnesium 5.033333 mg/L No limit Measured
Manganese 0.001 mg/L < 0.1 Good
Mercury 0.0001 mg/L No limit Measured
Nickel 0.001 mg/L No limit Measured
Nitrate 0.041571 mg/L < 50 Good
Nitrite 0.002 mg/L No limit Measured
pH 7.653387 pH units 6.5 – 8.5 Normal
Sodium 57.833333 mg/L < 180 Good
Sulfate 13.5 mg/L < 500 Good
Temperature 13.970968 degrees C No limit Measured
Total Coliforms 0 MPN/100ml < 0 Compliant
Total Dissolved Solids 313.333333 mg/L < 600 Good
Trihalomethanes 0.0195 mg/L < 0.25 Good
Turbidity 0.172419 NTU < 5 Good
Zinc 0.004625 mg/L No limit Measured
Fluoride 0.943333 mg/L < 1.5 Good

Safety assessment

Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Hard (142.857143 mg/L)

Water Hardness

Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.

Normal Range

pH Level

pH of 7.653387 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.943333 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.787581 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Cornwall measures 0.787581 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Watch for Limescale

Cornwall has hard water at 142.857143 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.

Fluoride in Your Water

Fluoride measures 0.943333 mg/L in Cornwall. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 313.333333 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Get water quality alerts

We'll email you when Cornwall's water data is updated.

Frequently asked questions

Is tap water safe to drink in Cornwall?
Yes, tap water in Cornwall is generally safe to drink. It scores 9.5 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by TasWater. Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Cornwall?
Water hardness in Cornwall is 142.857143 mg/L, classified as hard. Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
What water utility supplies Cornwall?
Cornwall is supplied by TasWater.
Does Cornwall water have fluoride?
Yes, water in Cornwall is fluoridated, with a fluoride level of 0.943333 mg/L. This is within the recommended range for dental health.
What is the water quality score for Cornwall?
Cornwall has a WaterScore of 9.5 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Cornwall?
The population of Cornwall, TAS is 82 according to the 2021 Australian Census. The median age of residents is 50 years.

Water utility

Utility
TasWater
Supply Zone
Cornwall
Data Source
TasWater — Cornwall, St Marys

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.5 and 10.0

Utility reports average the grid — not your home

Cornwall's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Hobart and Tasmania

In-depth articles on the water supply that serves Cornwall

Explore more

Related pages for Cornwall, TAS

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Hard water · 142.857143 mg/L — limescale risk

iSpring · ★ 4.6 on Amazon

Stop the scale →