As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Elizabeth Park, SA

Postcode 5113 · Supplied by SA Water via Northern metro Adelaide suburbs

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Elizabeth Park

Elizabeth Park is a suburb of 4,428 residents in South Australia (postcode 5113). The median age is 33. It falls within the SA Water area. Neighbouring suburbs include Elizabeth East, Elizabeth, Davoren Park North, Davoren Park South.

Most residents rent (46%), while 33% own their home with a mortgage, while 18% own outright. The median household income is $52,156 per year. The top countries of birth for residents are United Kingdom (27%), Afghanistan (16%), and Philippines (5%).

Tap water in Elizabeth Park is supplied by SA Water. The suburb receives water via the Northern metro Adelaide suburbs supply zone.

Water quality summary

Based on 2025 water quality reports, Elizabeth Park achieves a WaterScore of 9.0 out of 10, rated excellent overall. Water hardness measures 111 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.7 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.4 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 340 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Elizabeth East , Elizabeth , Davoren Park North

Suburb snapshot

Population

4,428

Median Age

33 years

Median Income

$1,003 /week

Owner-occupied

51%

Recommended filters for Elizabeth Park

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Elizabeth Park's water

A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Elizabeth Park's water profile.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Elizabeth Park's water

A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Elizabeth Park's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Elizabeth Park's water

A reliable 8.5l stainless steel gravity system suitable for Elizabeth Park's water profile.

How Elizabeth Park compares

Compared to South Australia and national averages

Metric Elizabeth Park SA Avg National Avg
Hardness 111 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 0.7 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.4 mg/L
Turbidity 0.1 NTU 0.1 NTU 0.4 NTU
TDS 340 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 66 mg/L No limit Measured
Aluminium 0.032 mg/L < 0.2 Good
Calcium 22.4 mg/L No limit Measured
Chloride 94 mg/L < 250 Good
Free Chlorine 0.4 mg/L < 5 Good
Total Chlorine 0.5 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0064 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.7 mg/L < 1.5 Good
Hardness 111 PPM or mg/L < 200 Good
Iron 0.007 mg/L < 0.3 Good
Lead 0.0005 mg/L < 0.01 Good
Magnesium 13.41 mg/L No limit Measured
Manganese 0.0008 mg/L < 0.1 Good
Nitrate 0.84 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 59.4 mg/L < 180 Good
Sulfate 48.7 mg/L < 500 Good
Total Dissolved Solids 340 mg/L < 600 Good
Turbidity 0.1 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (111 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.7 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.4 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Elizabeth Park measures 0.4 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Elizabeth Park's water is moderately hard at 111 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.7 mg/L in Elizabeth Park. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 340 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Slightly Acidic Water

pH measures 0.05 in Elizabeth Park, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when Elizabeth Park's water data is updated.

Frequently asked questions

Is tap water safe to drink in Elizabeth Park?
Yes, tap water in Elizabeth Park is generally safe to drink. It scores 9.0 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Elizabeth Park?
Water hardness in Elizabeth Park is 111 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Elizabeth Park?
Elizabeth Park is supplied by SA Water.
Does Elizabeth Park water have fluoride?
Yes, water in Elizabeth Park is fluoridated, with a fluoride level of 0.7 mg/L. This is within the recommended range for dental health.
What is the water quality score for Elizabeth Park?
Elizabeth Park has a WaterScore of 9.0 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Elizabeth Park?
The population of Elizabeth Park, SA is 4,428 according to the 2021 Australian Census. The median age of residents is 33 years.

Water utility

Utility
SA Water
Supply Zone
Northern metro Adelaide suburbs
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.0 and 10.0

Utility reports average the grid — not your home

Elizabeth Park's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Elizabeth Park

Explore more

Related pages for Elizabeth Park, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap