As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Fisher, SA

Postcode 5354 · Supplied by SA Water via Swan Reach Town

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Fisher

Fisher is a suburb of 61 residents in South Australia (postcode 5354). The median age is 59. It falls within the SA Water area. Neighbouring suburbs include Marks Landing, Swan Reach, Langs Landing, Punyelroo.

Most residents own outright (68%), while 14% own their home with a mortgage, while 0% rent. The median household income is $29,900 per year. The top countries of birth for residents are United Kingdom (157%).

Tap water in Fisher is supplied by SA Water. The suburb receives water via the Swan Reach Town supply zone.

Water quality summary

Based on 2025 water quality reports, Fisher achieves a WaterScore of 9.1 out of 10, rated excellent overall. Water hardness measures 73 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. Fluoride levels are very low at 0.1 mg/L, indicating the water is not significantly fluoridated. Chlorine, used for disinfection, measures 0.9 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 254 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Marks Landing , Swan Reach , Langs Landing

Suburb snapshot

Population

61

Median Age

59 years

Median Income

$575 /week

Owner-occupied

82%

Recommended filters for Fisher

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Fisher's water

Ideal for Fisher — removes chlorine taste and odour.

Waterdrop TSA 8-Layer Under-Sink Water Filter System

Waterdrop

TSA Under-Sink Filter (Fluoride + PFAS)

4.4 · 2,237 ratings on Amazon

Mid-range Matched to Fisher's water

A reliable tsa under-sink filter (fluoride + pfas) suitable for Fisher's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Fisher's water

Ideal for Fisher — removes chlorine taste and odour.

How Fisher compares

Compared to South Australia and national averages

Metric Fisher SA Avg National Avg
Hardness 73 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 0.1 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.9 mg/L
Turbidity 0.1 NTU 0.1 NTU 0.4 NTU
TDS 254 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 73 mg/L No limit Measured
Aluminium 0.022 mg/L < 0.2 Good
Calcium 13.7 mg/L No limit Measured
Chloride 76 mg/L < 250 Good
Free Chlorine 0.9 mg/L < 5 Good
Total Chlorine 1 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0264 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.1 mg/L < 1.5 Good
Hardness 73 PPM or mg/L < 200 Good
Iron 0.0112 mg/L < 0.3 Good
Lead 0.0003 mg/L < 0.01 Good
Magnesium 9.45 mg/L No limit Measured
Manganese 0.001 mg/L < 0.1 Good
Nitrate 0.53 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 50.7 mg/L < 180 Good
Sulfate 15.6 mg/L < 500 Good
Total Dissolved Solids 254 mg/L < 600 Good
Turbidity 0.1 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (73 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Low fluoride

Fluoride

Fluoride at 0.1 mg/L. Below the recommended range.

Chlorine

Disinfection

Chlorine measured at 0.9 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Fisher measures 0.9 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Fisher's water is moderately hard at 73 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.1 mg/L in Fisher. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Slightly Acidic Water

pH measures 0.05 in Fisher, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when Fisher's water data is updated.

Frequently asked questions

Is tap water safe to drink in Fisher?
Yes, tap water in Fisher is generally safe to drink. It scores 9.1 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Fisher?
Water hardness in Fisher is 73 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Fisher?
Fisher is supplied by SA Water.
Does Fisher water have fluoride?
No, water in Fisher is not significantly fluoridated, with a fluoride level of 0.1 mg/L. This is below the recommended range of 0.6–1.1 mg/L.
What is the water quality score for Fisher?
Fisher has a WaterScore of 9.1 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Fisher?
The population of Fisher, SA is 61 according to the 2021 Australian Census. The median age of residents is 59 years.

Water utility

Utility
SA Water
Supply Zone
Swan Reach Town
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.1 and 10.0

Utility reports average the grid — not your home

Fisher's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Fisher

Explore more

Related pages for Fisher, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 0.9 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →