Tap Water Quality in Hmas Rushcutters, NSW
Postcode 2027 · Supplied by Sydney Water via Potts Hill
Quality Score
About Hmas Rushcutters
Hmas Rushcutters is a suburb in New South Wales, Australia (postcode 2027). It falls within the Sydney Water area. Neighbouring suburbs include Darling Point, Edgecliff, Point Piper, Darling Harbour.
Tap water in Hmas Rushcutters is supplied by Sydney Water. The suburb receives water via the Potts Hill supply zone.
Water quality summary
Based on 2024-25 water quality reports, Hmas Rushcutters achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 48.3 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.8, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.01 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.04 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 137 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.11 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Darling Point , Edgecliff , Point Piper
Recommended filters for Hmas Rushcutters
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
Ideal for Hmas Rushcutters — removes fluoride (currently 1.01 mg/L).
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Hmas Rushcutters — removes fluoride (currently 1.01 mg/L).
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Hmas Rushcutters's water profile.
Comparison
How Hmas Rushcutters compares
Compared to New South Wales and national averages
| Metric | Hmas Rushcutters | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 48.3 mg/L | 45.9 mg/L | 85.3 mg/L |
| pH | 7.8 | 7.7 | 7.8 |
| Fluoride | 1.01 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 0.04 mg/L | — | — |
| Turbidity | 0.11 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 137 mg/L | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.005 | mg/L | < 0.3 | Good |
| Aluminium | 0.012 | mg/L | < 0.2 | Good |
| Manganese | 0.0018 | mg/L | < 0.1 | Good |
| Copper | 0.018 | mg/L | < 2 | Good |
| Zinc | 0.002 | mg/L | No limit | Measured |
| Ammonia | 0.272 | mg/L | No limit | Measured |
| Turbidity | 0.11 | NTU | < 5 | Good |
| Colour | 3 | HU | < 15 | Good |
| Dissolved Oxygen | 109.8 | % saturation | No limit | Measured |
| Total Dissolved Solids | 137 | mg/L | < 600 | Good |
| Sulfate | 8.8 | mg/L | < 500 | Good |
| Hardness | 48.3 | mg/L | < 200 | Good |
| pH | 7.8 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 19.6 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 0.04 | mg/L | < 5 | Good |
| Monochloramine | 1.74 | mg/L | < 3 | Good |
| Fluoride | 1.01 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.09 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| PFOS + PFHxS | 0.0014 | µg/L | PFOS < 0.008, PFHxS < 0.03 | Good |
| PFOA | 0.0002 | µg/L | < 0.2 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (48.3 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.8 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.01 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.04 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Hmas Rushcutters measures 0.04 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Hmas Rushcutters's water is soft at 48.3 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.01 mg/L in Hmas Rushcutters. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Hmas Rushcutters's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Hmas Rushcutters?
How hard is the water in Hmas Rushcutters?
What water utility supplies Hmas Rushcutters?
Does Hmas Rushcutters water have fluoride?
What is the water quality score for Hmas Rushcutters?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- Potts Hill
- Data Source
- Sydney Water — quarterly potts hill q2 202425, quarterly potts hill q3 202425, quarterly potts hill q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Hmas Rushcutters's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Hmas Rushcutters
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Hmas Rushcutters, NSW [Data set]. Compiled from Sydney Water data (2024-25 annual report). https://waterscore.com.au/water-quality/hmas-rushcutters-nsw/
Embed
Add Hmas Rushcutters, NSW water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Hmas Rushcutters, NSW
Is tap water safe?
Safety assessment
Water hardness
48.3 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Darling Point
Hmas Rushcutters vs Darling Point
Compare with Edgecliff
Hmas Rushcutters vs Edgecliff
Compare with Point Piper
Hmas Rushcutters vs Point Piper
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.