As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Lake Albert, SA

Postcode 5259 · Supplied by SA Water via Tailem Bend

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Lake Albert

Lake Albert is a suburb in South Australia, Australia (postcode 5259). It falls within the SA Water area. Neighbouring suburbs include Coorong, Meningie East, Meningie West, Policeman Point.

Most residents own their home with a mortgage (0%), while 0% own outright, while 0% rent. The median household income is $0 per year.

Tap water in Lake Albert is supplied by SA Water. The suburb receives water via the Tailem Bend supply zone.

Water quality summary

Based on 2025 water quality reports, Lake Albert achieves a WaterScore of 8.9 out of 10, rated excellent overall. Water hardness measures 88 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 8.8, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.7 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.1 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 299 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.13 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Coorong , Meningie East , Meningie West

Suburb snapshot

Population

0

Median Age

0 years

Median Income

$0 /week

Recommended filters for Lake Albert

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Lake Albert's water

A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Lake Albert's water profile.

Waterdrop TSA 8-Layer Under-Sink Water Filter System

Waterdrop

TSA Under-Sink Filter (Fluoride + PFAS)

4.4 · 2,237 ratings on Amazon

Mid-range Matched to Lake Albert's water

A reliable tsa under-sink filter (fluoride + pfas) suitable for Lake Albert's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Lake Albert's water

A reliable 8.5l stainless steel gravity system suitable for Lake Albert's water profile.

How Lake Albert compares

Compared to South Australia and national averages

Metric Lake Albert SA Avg National Avg
Hardness 88 mg/L 119.3 mg/L 85.1 mg/L
pH 8.8 3.2 8.4
Fluoride 0.7 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.1 mg/L
Turbidity 0.13 NTU 0.1 NTU 0.4 NTU
TDS 299 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 72 mg/L No limit Measured
Aluminium 0.023 mg/L < 0.2 Good
Calcium 17.5 mg/L No limit Measured
Chloride 84 mg/L < 250 Good
Free Chlorine 0.1 mg/L < 5 Good
Total Chlorine 3.2 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0068 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.7 mg/L < 1.5 Good
Hardness 88 PPM or mg/L < 200 Good
Iron 0.0024 mg/L < 0.3 Good
Lead 0.0002 mg/L < 0.01 Good
Magnesium 10.62 mg/L No limit Measured
Manganese 0.0013 mg/L < 0.1 Good
Nitrate 1.64 mg/L < 50 Good
pH 8.8 pH units 6.5 – 8.5 Outside range
Sodium 63.4 mg/L < 180 Good
Sulfate 45.2 mg/L < 500 Good
Total Dissolved Solids 299 mg/L < 600 Good
Turbidity 0.13 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.8 pH units. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (88 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 8.8 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.7 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Lake Albert measures 0.1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Lake Albert's water is moderately hard at 88 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.7 mg/L in Lake Albert. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Alkaline Water

pH measures 8.8 in Lake Albert, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.

Get water quality alerts

We'll email you when Lake Albert's water data is updated.

Frequently asked questions

Is tap water safe to drink in Lake Albert?
Yes, tap water in Lake Albert is generally safe to drink. It scores 8.9 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.8 pH units. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Lake Albert?
Water hardness in Lake Albert is 88 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Lake Albert?
Lake Albert is supplied by SA Water.
Does Lake Albert water have fluoride?
Yes, water in Lake Albert is fluoridated, with a fluoride level of 0.7 mg/L. This is within the recommended range for dental health.
What is the water quality score for Lake Albert?
Lake Albert has a WaterScore of 8.9 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Lake Albert?
The population of Lake Albert, SA is 0 according to the 2021 Australian Census. The median age of residents is 0 years.

Water utility

Utility
SA Water
Supply Zone
Tailem Bend
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.9 and 9.9

Utility reports average the grid — not your home

Lake Albert's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Lake Albert

Explore more

Related pages for Lake Albert, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap